基于零件故障率和拆卸时间的产品拆卸性定量评估方法
- 文件大小:1.01MB
- 浏览次数:
- 发布时间:2012-03-29
本资料包含pdf文件1个,下载需要1积分
基于零件故障率和拆卸时间的产品拆卸性定量评估方法基于零件故障率和拆卸时间的产品
拆卸性定量评估方法
孙有朝 1
黄进永 2
王 伟 1
(1. 南京航空航天大学民航学院 南京 210016;
2. 工业和信息化部电子第五研究所 广州 510610)
摘要:针对传统方法基于经验、没有考虑拆卸效率等问题,提出-种新的基于零件故障率和拆卸时间的产品拆卸性定量分析
与评估方法。基于图论思想和面向对象技术,建立产品拆卸约束图信息模型,实现拆卸信息建模;根据最优拆卸序列和零件
拆卸操作过程仿真,提出基于模特法的产品零件基本拆卸时间的确定方法;引入零件故障率权重,将基本拆卸时间转换为相
对拆卸时间,建立基于零件故障率和拆卸时间的产品拆卸效率综合评价模型,实现产品拆卸性的定量分析与评估♂合实例
说明了产品拆卸效率的计算方法以及基于产品拆卸效率的拆卸性定量评估方法和步骤。实例表明,该评估方法合理、可行,
能有效地指导设计者优化产品拆卸性设计,具有良好的工程应用价值。
关键词:产品拆卸性 拆卸效率 定量评估 故障率权重 模特法
中图分类号:TH122 TB497
Quantitative Evaluation Method of Product Disassembly Based on
Parts Failure Rate and Disassembly Time
SUN Youchao1
HUANG Jinyong2
WANG Wei
1
(1. College of Civil Aviation, Nanjing University of Aeronautics and Astronautics, Nanjing 210016;
2. The 5th Electronics Research Institute, Ministry of Industry and Information Technology, Guangzhou 510610)
Abstract:In view of the fact that product disassembly efficiency is not taken into consideration in the traditional method based on
experts experience, a new quantitative evaluation method of product disassembly is herein presented based on parts failure rate and
its disassembly time. Product information model with respect to its disassembly constraint graph is established on the basis of graph
theory thought and object-oriented technology. Through developing the procedures of product disassembly sequence generation and
optimization, parts disassembly process is simulated and a method of determining the basic disassembly time of product parts is
proposed on the basis of modular arrangement of predetermined time standard (MODAPTS). By introducing part failure rate weight,
basic disassembly time is converted to relative disassembly time and a calculation model of product disassembly efficiency is
established on the basis of parts failure rate and its disassembly time so that the quantitative analysis and evaluation of product
disassembly is implemented. The calculation method and its evaluation steps of product disassembly efficiency are demonstrated by
combining with one example. Furthermore, the example shows that this quantitative evaluation method is reasonable, feasible, and
able to optimize product disassembly design, thus having good engineering application value.
Key words:Product disassembly Disassembly efficiency Quantitative evaluation Failure rate weight
Modular arrangement of predetermined time standard (MODAPTS) method
国家自然科学基金
- 1T/CEC 144-2017 过热器和再热器化学清洗导则
- 2造价工程师考试重点
- 3GB/T 24715-2009 氧源转换器
- 4某地产新员工入职引导手册
- 5GB 7036.2—1997 充气轮胎内胎 第2部分:摩托车轮胎
- 6大地坐标和经纬度之间的换算MAPGIS
- 7LY/T 3005.6-2018 杜仲综合体 第6部分:材药兼用杜仲栽培技术规程
- 8XX售楼厅暖通暖通CAD图纸
- 9江苏省4层框架结构办公楼建筑专业施工图
- 10喷泉水景设计cad施工图(版本2)
- 11一级建造师执业资格考试模拟试卷水利水电工程第三套
- 12注册二级结构工程师
- 13全国勘察设计注册公用设备工程师给水工程 (2)
- 14GB 13052-1991 客车外观质量技术要求及检验方法
- 15减速器cad图2