ANSI B92.1-1970(R1993) SAE花键标准(外文版)
- 文件大小:238.25KB
- 浏览次数:
- 发布时间:2012-09-21
本资料包含pdf文件1个,下载需要1积分
ANSI B92.1-1970(R1993) SAE花键标准(外文版)
Form Circle is the circle which defines the deepest points of involute form control of thetooth profile. This circle along with the tooth tip circle (or start of chamfer circle) deter-mines the limits of tooth profile requiring control. It is located near the major circle on theinternal spline and near the minor circle on the external spline.
Form Clearance ( cF) is the radial depth of involute profile beyond the depth of engage-ment with the mating part. It allows for looseness between mating splines and for eccen-tricities between the minor circle (internal), the major circle (external), and their respectivepitch circles.
Form Diameter (DFe, DFi) the diameter of the form circle.
Internal Spline is a spline formed on the inner surface of a cylinder.
Involute Spline is one having teeth with involute profiles.
Lead Variation is the variation of the direction of the spline tooth from its intended direc-tion parallel to the reference axis, also including parallelism and alignment variations (seeFig. 1a ). Note: Straight (nonhelical) splines have an infinite lead.
Length of Engagement ( Lq) is the axial length of contact between mating splines.
Machining Tolerance ( m ) is the permissible variation in actual space width or actualtooth thickness.
Major Circle is the circle formed by the outermost surface of the spline. It is the outsidecircle (tooth tip circle) of the external spline or the root circle of the internal spline.
Major Diameter ( Do, Dri) is the diameter of the major circle.
Minor Circle is the circle formed by the innermost surface of the spline. It is the root cir-cle of the external spline or the inside circle (tooth tip circle) of the internal spline.
Minor Diameter ( Dre, Di) is the diameter of the minor circle.
Nominal Clearance is the actual space width of an internal spline minus the actual tooththickness of the mating external spline. It does not define the fit between mating members,because of the effect of variations.
Out of Roundness is the variation of the spline from a true circular configuration.
- 1基于随机模型的注浆可靠性研究
- 2工序隐蔽工程检查记录
- 3GB/T 28063-2011 菜豆荚斑驳病毒检疫鉴定方法
- 4SJ 2845.1-1987 电气继电器 第七部分 总规范 有或无机电继电器测试方法(可供认证用)
- 5HG 20571-95 化工企业安全卫生设计规定
- 6悬挑式脚手架验收表(含钢结构)
- 7GB/T 30800-2014 冷冻饮品生产管理要求
- 8CAD 801种填充图案
- 9鲁班、神机、筑业、品茗等写锁工具及数据
- 10工程表式(含施工用表、监理用表、设计用表、通用表)
- 11政务中心弱电施工图
- 12办公楼、管理式公寓机电设备安装工程施工组织设计
- 13自动装箱生产线系统的设计毕业设计任务书
- 14某多层住宅建筑su模型(版本2)
- 15831005铣床夹具装配图