A36A 36M - 04
- 文件大小:31.38KB
- 浏览次数:
- 发布时间:2013-03-24
本资料包含pdf文件1个,下载需要25积分
1.1 This specification
2
covers carbon steel shapes, plates,
and bars of structural quality for use in riveted, bolted, or
welded construction of bridges and buildings, and for general
structural purposes.
1.2 Supplementary requirements are provided for use where
additional testing or additional restrictions are required by the
purchaser. Such requirements apply only when specified in the
purchase order.
1.3 When the steel is to be welded, a welding procedure
suitable for the grade of steel and intended use or service is to
be utilized. See Appendix X3 of Specification A 6/A 6M for
information on weldability.
1.4 The values stated in either inch-pound units or SI units
are to be regarded separately as standard. Within the text, the
SI units are shown in brackets. The values stated in each
system are not exact equivalents; therefore, each system is to
be used independently of the other, without combining values
in any way.
1.5 The text of this specification contains notes or footnotes,
or both, that provide explanatory material. Such notes and
footnotes, excluding those in tables and figures, do not contain
any mandatory requirements.
1.6 For structural products produced from coil and fur-
nished without heat treatment or with stress relieving only, the
additional requirements, including additional testing require-
ments and the reporting of additional test results, of A 6/A 6M
apply.
- 1二级建造师《建筑工程管理与实务》第三版教材_部分3
- 2电气照明工程方案
- 3蓄电池安装工艺
- 4仿真闹钟SolidWorks设计
- 5卷扬机总图
- 6广东省建筑工程竣工验收技术资料统一用表---建筑工程施工记录1、建筑工程
- 7SJ 51438.3-1995 PM25型接触件间距为1.905mm的印制电路插座连接器详细规范
- 8装潢装饰工程预算书
- 9HB/Z 5218.6-2004 铝合金化学分析方法 第6部分:硅钥蓝光度法测定硅含量
- 10品茗胜算ET199写锁
- 11百叶窗冲裁凸模CAD图纸
- 12新点点网吧消防10.04
- 13土工试验检测试验答案1-7
- 14云蝶A别墅施工图(CAD图纸)
- 15【试验作业指导书】土的无侧限抗压强度试验作业指导书