基于Pro/E的开口机构惯性载荷特性研究
- 文件大小:619.98KB
- 浏览次数:
- 发布时间:2014-03-06
本资料包含pdf文件1个,下载需要1积分
To study characteristics of inertial loading of shedding mechanism of loom, this study conducts dynamic simulation of shedding mechanism by using mechanism analysis module of Pro/E and analyzes the distribution law of equivalent load of each component part. The research result shows that the equivalent moment of inertia of heald frame, orthogonal connecting rod and drive shaft respectively accounts for 42%, 20. 8% and 8. 2% in the whole shedding mechanism. With the increase of shedding stroke, quality of harness wire and speed of rotation, the driving moment constantly increases. Therefore, selecting an appropriate shedding stroke and using lighter harness wire are two effective ways to reduce driving load.为研究织机开口机构的惯性载荷特性,利用Pro/E的机构分析模块对开口机构进行动态仿真,并分析了各个构件等效载荷的分布规律。研究结果显示:综框、直角连杆和驱动轴的等效转动惯量在整个开口机构中分别占了42%、20.8%和8.2%;随着开口动程、综丝的质量和转速的增加,驱动力矩也不断增大。因此,选择合适的开口动程和使用更轻材质的综丝是降低驱动载荷的两种有效途径。
- 1FANUC0i系统进给伺服电机的选择
- 2胶带机溜槽改造方案3D示意图
- 3QB/T 2442.3-1999 夹扭剪切两用钳 带刃尖嘴钳
- 4压电式加速度传感器在振动测量系统的应用研究
- 5墨卡托投影、高斯-克吕格投影、UTM投影及我国采用的6度分带和3度分带
- 6广电罗家墩住宅项目整合推广方案
- 7建设内蒙古大绿色能源基地刍议
- 8三菱plc实例
- 9GB/T 6803-2008 铁素体钢的无塑性转变温度落锤试验方法
- 10殡仪馆外网电气施工方案
- 11EJ/T 972-2005 核电厂应急柴油发电机组燃油系统设计准则
- 12强夯及强夯置换施工工艺
- 13行业规范一览表
- 14基于ALOHA算法的RFID防碰撞技术研究
- 15GB/T 17388-2010 潜油电泵装置的安装