微晶玻璃与轴承钢的磨损机理分析
- 文件大小:443.47KB
- 浏览次数:
- 发布时间:2014-03-07
文件介绍:
本资料包含pdf文件1个,下载需要1积分
This paper carried out the disk and pin friction-wear tests by use of ftuorophlogopite glass ceramic and bearing steel. The friction coefficient and wear rate were tested. The morphologies of worn surfaces of glass-ceramics and bearing steel were observed by using the optical microscope. The results show that: the lower loads, the lower friction coefficient; when the load increases, the coefficient of friction tend to be stable at 0. 095. In the whole process of grinding, abrasive wear is the main wear form between glass ceramics and bearing steel materials.选择了氟金云母陶瓷与轴承钢进行了盘销式摩擦磨损试验,测试了摩擦因数和磨损率。通过金相显微镜观察了材料表面的磨损形貌,探究了玻璃陶瓷与轴承钢的磨损机理。研究结果表明:在较低载荷作用下,摩擦因数较低;载荷继续增加,摩擦因数趋向稳定;在整个对磨过程中,玻璃陶瓷与轴承钢的磨损机理以磨料磨损为主。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1钢结构箱梁和匝道施工技术
- 2本溪姚家河滨路工程施工组织设计方案
- 3梁板柱钢筋绑扎技术与安全
- 4上料皮带机安装图CAD图纸
- 5火管式废热锅炉
- 6电力线载波通信系统中的单片机程序设计
- 7883.建筑基坑变形监测方法分析(摘录自山西建筑07年8期138-139页)
- 8北京某综合楼装修施工组织设计
- 9BS EN 10246-10-2000 钢管的无损检验.缺陷探测用自动熔融电弧焊接钢管焊缝的放射线检验
- 10建筑工程施工技术质量资料管理_secret
- 11电力施工质量验评标准
- 12某某工程创优质量施工措施
- 13国产车系自动变速器的维修 PDF扫描
- 14剃须刀catia设计
- 15110KV榜德施工组织设计报审表