低噪声舰船尾管水润滑橡胶轴承材料的研究
- 文件大小:969.97KB
- 浏览次数:
- 发布时间:2014-03-09
本资料包含pdf文件1个,下载需要1积分
Theoretical research and experimental validity of water-lubricated bearing materials for ship stern tube is of great importance in both civilian and military applications. In order to study tribological properties of the new material SPB-N, a series of experiments are carried out on the test rig SSB-100. Friction coefficients andvibration characteristics of SPB-N samples under different working conditions are acquired and analyzed using torque meter and accelerometer. Analysis results show that mechanical and physical properties of SPB-N have met the requirements of ship standard specified by CB/T769-2008. Stick-slip effect of SPB-N is induced with critical speed of 0.27 m/s, which shows excellent low-speed performance of this new material. Moreover, its friction coefficient reaches a minimum value at the speed of 0.54 rn/s. Local specific pressure of SPB-N is 0.7 MPa. The composite rubber material material with excellent all-round performances. SPB-N is served as a kind of water-lubricated bearing水润滑尾管轴承材料的研制,具有重要的理论意义以及军事应用价值。为了研究新材料SPB-N的摩擦学性能,在尾管轴承试验台架SSB-100上进行了试块和轴承试验,利用扭矩转矩仪和BK加速度传感器测定了该材料在各工况条件下的摩擦系数和振动情况。结果表明:复合橡胶材料SPB-N的机械-物理性能达到了中国船标CB/T769-2008要求。该材料的摩擦学性能和低转速性能表现优异:在O.28Mpa比压下,转速为0.54m/s时其摩擦系数达到最小值;其产生粘.滑现象的临界转速为0.27m/s,且局部比压可达0.7MPa。这表明复合橡胶材料SPB.N是一种综合性能优异的水润滑轴承材料。
- 1四川省建设工程工程量清单计价定额(说明及计算规则)
- 2GB 12085.1-1989 光学和光学仪器 环境试验方法 术语、试验范围
- 3设计-DTⅡ型皮带机设计
- 4全站仪高程导线代替三、四等水准方法的探讨
- 5YB/T 083-1996 冶金标准样品的包装、运输及储存
- 6101.外墙粘贴聚苯乙烯板外保温施工(摘录自陕西建筑与建材07年1期第21-25、3页)
- 7项目开发作业指引:项目经济效益测评
- 8DB61/T 367.23-2005 荷斯坦牛挤奶技术操作规范
- 9安全图片
- 10YS/T 1164-2016 硅材料用高纯石英制品中杂质含量的测定 电感耦合等离子体发射光谱法
- 11江苏省的水施工资料
- 12JIS X4002-1987 File specification for Japanese documents interchange (business graph type)
- 13GB 3758.1-1983 卡套式锥螺纹对接直角管接头
- 14GB/T 15908-2009 塑料软管及软管组合件 液压用织物增强型规范
- 15西安文艺会展广场景观绿化设计施工图