新型磁悬浮式离心铸造机微动工作台研究
- 文件大小:1.07MB
- 浏览次数:
- 发布时间:2014-03-09
本资料包含pdf文件1个,下载需要1积分
Aimed at the working principle of centrifuge casting machine, a new method of magnetic suspension micromotion with AC/DC hybrid driving was presented, and a new-type magnetic suspension micromotion workbench was designed, which can realize the wide-range micro-motion of casting machine with six degrees of freedom as well as the micro movement at the constant height. And the relationships curve between the winding current, the air gap and the driving force in the micromotion stage were drawn according to the equation of the winding current, the air gap and the driving force. Finally, the stability of the magnetic suspension micromotion workbench in the open-loop state and one-dimensional micro-movement was tested. The feasibility of the magnetic suspension micromotion workbench designed in this paper can be validated by the results of the stability and one-dimensional micro-movement.针对离心铸造机工作原理.提出了一种交直流混合驱动的磁悬浮式微运动新方法,设计了一种新型的磁悬浮式微动工作台,可实现大范围6自由度微运动和恒高度微运动。根据绕组电流和气隙及驱动力关系方程,绘制了绕组电流与气隙和驱动力力关系曲线,最后在开环状态下进行了该磁悬浮式微动工作台的稳定性试验和一维微运动试验。实验结果初步验证了本文设计的磁悬浮式离心铸造机微动工作台的可行性。
- 1JB/T 6064-1992 渗透探伤用镀铬试块 技术条件
- 2技术标(钢塑复合管、铝塑复合管、地板辐射采暖)
- 3JT/T 740-2009 路面橡胶沥青灌缝胶
- 4新型耙式干燥机总图
- 5北京某公园景观施工图
- 6建筑工程现浇梁满堂支架施工方案
- 7精选阀门图块集V50版CAD图纸
- 8JB/T 10231.9-2002 刀具产品检测方法 第9部分:绞刀
- 9[湖南]某步行街景观施工图设计
- 10繁昌大润发商业广场幕墙工程施工组织设计
- 11遥控器使用方法
- 12右壳体
- 13四川省农村公路设计编制指南四川省农村公路设计编制指南
- 14建筑施工手册(第四版)34 施工组织设计
- 15一级建造师机电实务考试模拟题2011新第三版B卷