羟磷灰石(HAP)铣削加工实验研究
- 文件大小:791.77KB
- 浏览次数:
- 发布时间:2014-03-10
本资料包含pdf文件1个,下载需要1积分
Hydroxyapatite (HAP) is a widely used bio-ceramic in the fields of orthopedics and dentistry. The machinability of solid form of HAP in end milling operations was studied. Machining effects of machining conditions such as cutting speed, feed and cutting depth on surface roughness and tool wear were focused on. Milling experiments analyses show that the surface roughness is bet- ter with high cutting speed and cutting depth, which are same as those of metal material. Furthermore, the brittle assessment of HAP is found in the machined surface. And the tool wear is up to stable state in relatively short time, especially in high cutting speed.HAP是一种已在牙修复以及骨修复领域得到广泛应用的生物陶瓷。对该材料进行铣削实验研究,主要考察切削速度、进给量和切削深度对表面粗糙度和刀具耗损的影响。结果表明:随切削速度和切削深度的增加,表面粗糙度会相应减小;而进给速度的增加则会增大粗糙度,基本和塑性材料加工规律类似,但是加工面更多地显现出脆性材料的去除特性;刀具在第一次加工中就达到磨损稳定状态,在切速较高的时候尤为明显。
- 1路面沥青砼摊铺工程施工组织设计
- 2陕西定额全说明
- 3外脚手架搭设方案及计算书
- 4某县XX水库除险加固工程施工组织设计
- 5新城安置小区高层框剪结构工程施工组织设计
- 6转炉钛合金上料除尘通风槽安装图
- 7DB52/T 1331-2018 北斗车载导航终端电磁兼容测量方法
- 8减振道床垫地段整体道床施工作业指导书
- 9某区域详细规划设计CAD图纸
- 10GB/T 32076.5-2015 预载荷高强度栓接结构连接副 第5部分:平垫圈
- 11cjt 54-1999 城市污水 五日生化需氧量的测定 稀释与接种法
- 12GB/T 23750-2009 植物性产品中草甘膦残留量的测定 气相色谱-质谱法
- 13一套很不错的别墅设计施工图(CAD图纸)
- 14宁波市荣和电子厂仓库给排水工程施工平面图
- 15电气试验报告