硅基材料微观摩擦磨损形貌实验研究
- 文件大小:219.93KB
- 浏览次数:
- 发布时间:2014-03-11
本资料包含pdf文件1个,下载需要1积分
The adhesive and tribological properties were studied with an atomic force microscope (AFM). Meanwhile, the effects of relative humidity and scanning cycles were taken into consideration. In addition, a resolution was tried to be proposed. The results indicate that the effects of hysteresis and nonlinearity of the piezo-tube are significant on the friction measurement with the AFM. The relative humidity exerts great influ- ence on the adhesion and friction coefficient of the surface when it goes larger gradually. Moreover, the applied load and sliding cycles directly determine the wear property of the silicon-based material.利用扫描探针显微镜考察了硅基材料的摩擦磨损性能,同时考虑了环境因素、循环扫描次数的影响;通过实验设计,得出了该材料表面的形貌,初步分析了其摩擦磨损性能。结果表明:压电陶瓷的滞后效应和非线性效应的影响比较显著;随着外界湿度的增加,湿度对材料表面黏附力和摩擦系数有较大的影响;外加载荷和扫描循环次数直接决定材料表面的耐磨性能。
- 1DB13/135-1992 玉米联合固氮菌剂
- 2JIS K8500-2007 N,N-Dimethylformamide (Reagent)
- 3东南环线工程施工总价承包招标文件
- 4壳牌气化炉工艺流程
- 5大体积砼浇筑方案(带测温措施)
- 6货车底盘布置设计(图纸 说明书)
- 7黄河水保生态工程郑州邙山生态园区埋剑沟小流域项目竣工验收材料汇编
- 84叶涵道SolidWorks设计
- 9DB12/T 525-2014 工业园区清洁生产评价规范
- 10外墙聚苯乙烯保温胶及其制配技术
- 11表格中斜表头的做法
- 12室内装饰装修工程施工组织设计、进度控制与科学管理及标准规范实务全书
- 13机器人玩偶3D打印stl格式
- 14综合监理细则
- 15QC 如何提高桥面铺装平整度