隔振器橡胶材料硬度对其固有频率影响的研究
- 文件大小:516.69KB
- 浏览次数:
- 发布时间:2014-03-11
本资料包含pdf文件1个,下载需要1积分
Structural design for the same hardness of three different isolator materials through theoretical calculations and experimental test of this model are in the same load isolator natural frequency and dynamic stiffness.Comparing calculated and test results show that the basic accuracy of the results,for the design of small deformation vibration isolators can be calculated using the linear viscoelastic theory.As can be seen from the test results of the hardness of rubber vibration isolator increases,natural frequency of vibration isolator and the dynamic stiffness increased.针对相同结构设计了三种不同材料硬度的隔振器,通过理论计算和试验测试得到此型号隔振器在同一载荷下的固有频率及其动刚度.计算结果和测试结果对比表明,计算结果基本准确,对于小变形隔振器的设计计算可以使用线性粘弹性理论计算.从测试结果可以看出随着隔振器橡胶材料硬度逐渐增大,隔振器固有频率及其动刚度逐渐增大.
- 1YB/T 4470-2015 不锈钢丝绳用钢丝
- 2高速游艇SolidWorks设计
- 3钢筋混凝土柱主筋被割断处理方案1
- 4跨线桥全套图纸
- 5四角锥螺栓球网架结构设计施工图纸CAD
- 6GB/T 2390-2013 染料 pH值的测定
- 7[从零开始学电路基础].刘建清.扫描版
- 8DB50/T 528-2013 机动车射频识别 标签工程安装要求
- 9不锈钢耐蚀研究
- 10GB/T 18487.3-2001电动车辆传导充电系统电动车辆交流直流充电机(站)
- 11变压器step/stp格式
- 12GB/T 7111.5-2002 纺织机械噪声测试规范 第5部分:机织和针织准备机械
- 13泛亚大厦地下车库汽车坡道建筑设计施工图纸CAD
- 1417.砂浆汇总计算
- 15八字式管道出水口大样图cad