热门关键词:

烧结温度对纤维增强复合材料影响的研究

  • 该文件为pdf格式
  • 文件大小:227.24KB
  • 浏览次数
  • 发布时间:2014-03-11
文件介绍:

本资料包含pdf文件1个,下载需要1积分

The steel fiber reinforced Sn-Cu-Fe-WC materials are fabricated by using powder metallurgical processing technique.The impact of sintering temperature on the properties of composite materials is analysed.The results show that the best sintering temperature is 940 ℃ when the tensile strength reaches its maximum,while its plastic toughness decreases slightly.用粉末冶金法制备了钢纤维增强的Sn-Cu-Fe-WC基复合材料,研究了烧结温度对复合材料性能的影响。结果表明:最佳烧结温度为940℃时抗拉强度达到最大值,同时其塑韧性略有降低。

正在加载...请等待或刷新页面...
发表评论
验证码 验证码加载失败