数控车床位置精度检测与评定方法对比分析
- 文件大小:465.26KB
- 浏览次数:
- 发布时间:2014-03-12
本资料包含pdf文件1个,下载需要1积分
In order to get the best measurement and evaluation methods of NC lathe,firstly,this paper introduced tools and methods in the measurement of position accuracy for NC lathe and analyzed several measuring methods.The commonly used at home and abroad four evaluation standards were detailed.Secondly,the position error values for NC lathe were measured by using laser interferometer.Finally,specific indicators of position accuracy――position accuracy,repeatable positioning accuracy,reverse difference,systematic deviation were calculated by using the four evaluation standard.The calculation results were analyzed and compared.This study clarifies various concrete situations when the four methods were applied to guide position accuracy measurement of production,checking for NC lathes.为了得到最佳的数控车床位置精度检测和评定方法,介绍了数控车床常用的位置精度测量工具和方法,对几种检测方法进行了对比分析,介绍了目前国内外常用的4种评定标准;利用激光干涉仪测量某重型数控车床位置精度值,利用上述4种评定标准对位置精度具体指标―――定位精度、重复定位精度、反向差值和系统偏差进行计算,对计算结果进行了分析对比;明确了各种评定方法的具体运用情况,从而为数控车床的生产、验收和使用中的位置精度检测提供指导。
- 1(建筑)建设工程工程量清单计价规范附录
- 2攻克“300米长梯形预应力环梁”裂缝难关
- 3奇瑞4s店施工详图(很详细的桁架玻璃幕墙图)
- 4旋纽模具毕业设计全套
- 5可爱鲸鱼钥匙链中望3D设计
- 6HJ 1051-2019 土壤 石油类的测定 红外分光光度法
- 7灰土挤密桩试桩施工方案
- 8国标链条图
- 9GB/T 22888-2008 皮革 物理和机械试验 表面涂层低温脆裂温度的测定
- 10GB/T 19444-2004 硅片氧沉淀特性的测定-间隙氧含量减少法
- 11Q/KYH 0003-2013 昆明经开区洛羊亿和森达食品厂 自发苦荞粉
- 12某粮油综合加工基地面粉车间工程安全文明施工方案
- 13YDT 1315-2004 No.7信令与IP互通适配层测试方法-消息传递部分(MTP)第二级对等适配层(M2PA)
- 14电缆隧道施工组织设计
- 15危险化工工艺安全控制要求