基于ADAMS的牛头刨床摆动导杆机构速度平稳性优化设计
- 文件大小:1.04MB
- 浏览次数:
- 发布时间:2014-03-12
本资料包含pdf文件1个,下载需要1积分
In the velocity optimization process of the cutting movement in the shaping guide--rod mechanism, it has adopted the method of parameterize optimization which comes from the ADAMS, coordinate value of the moving points substitutes the rod length as the design variables, all the coordinates has been parameterized, the sensitivity to velocity of each design variables are tested, and then it has received and judged out which are the key design variables, the optimum parameters of each key design variables is determined in the optimization calculation, and the most suitable parameters of shaping mechanism which tile veh)city is steady and uniform has been found finally.采用了ADAMS参数化优化的设计方法,对牛头刨床切削运动导杆机构进行速度平稳性的优化,以运动点的坐标值作为设计变量代替杆长,将各个坐标值进行了参数化处理,建立了牛头刨床机构参数化模型,将各个设计变量对速度的敏感度进行了测试,得到并判断出关键设计变量,在优化计算中确定了各个关键设计变量的最优参数,最终得到了速度平稳性良好的牛头刨床尺寸参数。
- 1滚筒 图片SolidWorks设计
- 2郑州航院课程设计作业SolidWorks设计
- 3双向门阻尼器step/stp格式
- 4GB/T 16657.2-2008 工业通信网络 现场总线规范 第2部分:物理层规范和服务定义
- 5铁路建设监理工作标准化指导书
- 6透镜CAD尺寸图
- 7JIS B0125-1-2001 液压气动系统及元件 图形符号和电路图 第1部分 图形符号
- 8大连某工程基坑支护监理细则
- 9配电板及户表板的安装
- 10GB 50244-1995 建筑防腐蚀工程质量 检验评定标准
- 1110kV电力电缆常见故障_故障点查找方法及防治措施
- 12DB46/283-2014 蒸压加气混凝土砌块单位产品综合能耗和电耗限额
- 13碟形世界中的标识吊坠stl格式
- 14材料表计算系统4.0小软件
- 15GB/T 3608-1993 高处作业分级