楔形间隙中受剪颗粒介质及表面多体接触的瞬态过程分析
- 文件大小:361.92KB
- 浏览次数:
- 发布时间:2014-03-14
本资料包含pdf文件1个,下载需要1积分
Explicit FEA was used to study the shear behavior of granular media in a wedge-- shaped gap, and the asperities whose sizes were close to the scale of granules was constructed on the lower boundary surface. The results of numerical experiments have proved that the explicit FEM can capture the shear behavior of granular media and the stress distribution before and after the collision as well as granule deformation. When the granules contact with each other and form a strong multi-- body chain, peak value of friction force and uplift force will occur. In addition, the influences of fric tion coefficient and material hardness on the stress distribution, friction force and uplift force were discussed.应用显式有限元方法研究了颗粒介质在楔形摩擦副中的受剪切行为,其中下表面具有与颗粒介质尺度接近的连续凸峰。数值试验表明,显式有限元方法能够捕捉颗粒介质的受剪切行为、碰撞和挤压前后的应力分布、颗粒的塑性变形等。发现了当颗粒多体接触并形成强力链时,会使摩擦界面产生摩擦力和抬升力的峰值。同时探讨了不同的摩擦因数和材料硬度对颗粒介质的应力分布、摩擦力和抬升力的影响。
- 1益田花D区样板房装修设计施工图
- 2深圳电子科技大厦二期工程风洞试验研究
- 3GB-T 10609.3-2009 技术制图 复制图的折叠方法
- 42012年某机构一级建造师市政实务考试预测模拟试题第一套
- 52013年优路教育一级建造师建筑工程实务冲刺讲义 [一]
- 6现浇箱梁施工
- 7skeleton骷髅step/stp格式
- 8Q/BQB 2731-2009 高碳铬轴承钢圆钢
- 9配电箱安装施工要点
- 102011年造价工程师《第四章工程项目管理》冲刺复习重点笔记
- 11安装计算规则
- 12室内冷热水管道安装中如何选择PP-R管
- 13QB/T 2080-1995 高回弹软质聚氨酯泡沫塑料
- 14给水排水设计手册(第二版)工业排水
- 15自动裁切机SolidWorks模型设计