热门关键词:

聚四氟乙烯编织复合材料摩擦温度与磨损特性

  • 该文件为pdf格式
  • 文件大小:951.74KB
  • 浏览次数
  • 发布时间:2014-03-15
文件介绍:

本资料包含pdf文件1个,下载需要1积分

Measuring polytetrafluoroethene(PTFE) fabric composites friction and wear performance with the change of the temperature trend are carried out on high-speed tribo-tester to analysis of the temperature on the influence of friction and wear performance. The results show that friction coefficient have significantly reduced trend from 30 ℃ temperature began to rise. Between 65-210℃, friction coefficient is in stable stage. When the temperature reaches 210 ℃, friction coefficient is beginning to rise as the temperature rising. Through the SEM photographs of the wear debris analyzed suggests that wear debris components in the main is large fiber in high temperature, while low temperature conditions, wear debris mainly is the tiny particles. The wear obviously effect by temperature, temperature over 200 ℃, when a sharp increase of PTFE fabric composites wear. To ensure the stability of PTFE fabric composites friction and wear performance, 200℃ is the limit temperature of dynamic monitoring friction temperature.在高频压摆摩擦磨损试验机上对自制聚四氟乙烯(Polytetrafluoroethene,PTFE)编织复合材料进行摩擦学性能试验,研究摩擦温度与摩擦磨损特性的关系。试验结果表明:摩擦温度对PTFE编织复合材料的摩擦因数影响显著,摩擦温度在30~60℃范围内升高,摩擦因数有明显的降低趋势,在65~210℃范围内摩擦因数处于稳定阶段,210℃是摩擦因数的突变摩擦温度。通过扫描电子显微镜对不同工况下产生的磨屑进行显微分析表明:高温下产生的磨屑与低温下的磨屑明显不同,低温下产生的磨屑为细小的片状,高温下产生的磨屑以大片的断裂纤维为主,材料磨损严重。PTFE编织复合材料的耐磨性受摩擦温度影响较大,200℃是PTFE编织复合材料磨损率的转折点。为保证该PTFE编织复合材料良好的摩擦磨损性能,摩擦温度动态监测值不能超过200℃。

正在加载...请等待或刷新页面...
发表评论
验证码 验证码加载失败