乏油条件下圆柱滚子轴承的弹流润滑分析
- 文件大小:625.18KB
- 浏览次数:
- 发布时间:2014-03-15
本资料包含pdf文件1个,下载需要1积分
According to the theory of elastohydrodynamic lubrication(EHL) in finite line contacts ,taking the equivalent thickness of the oil-supply layer and relevant parameter of bearings as input data, a full numerical solution of the cylindri- cal roller bearings EHL under starved oil-supply condition was obtained. The lubrication performance between the fully- flooded and starved condition was compared, and the effects of the thickness of the oil-supply layer, the load, and the rota- ting speed on the lubrication performance of cylindrical roller bearings under starved condition were investigated. Results show that, as the oil-supply quantity decreases, the film thickness declines, the second pressure peak becomes lower and the pressure starting position moves towards the Hertzian contacting region. When the load increases, the film thickness gets thinner, which has disadvantage to the lubrication of bearings. The pressurized region becomes flatter and the film constric- tion moves towards the outlet zone with the increasing of the rotating speed, and the starved degree becomes more serious.基于有限长线接触弹流润滑理论,将等效供油层厚度和轴承相关参数作为输入量,求得乏油条件下圆柱滚子轴承弹流润滑的完全数值解;比较充分供油与乏油条件下轴承的润滑性能,研究乏油条件下供油层厚度、载荷、转速对圆柱滚子轴承润滑性能的影响。结果表明:随着供油量的减小,油膜厚度减小,第二压力峰降低,压力的起始点位置移向Hertz接触区;载荷增加,油膜厚度减小,这将对轴承的润滑产生十分不利的影响;随着转速的增加,压力区变得平坦,油膜颈缩向出口区移动,乏油程度更加严重。
- 1筑业江苏2010资料软件正式版+++补丁
- 2HJ 2060-2018 铜冶炼废气治理工程技术规范
- 3JIS X5777-1994 Information technology -- Open Systems Interconnection -- Systems Management:Security
- 4GMP认证检查条款
- 5一级建造师考试(建设工程经济)历年真题及答...
- 6河床式电站厂房进水口结构钢筋CAD图纸
- 7泵站技术供水盘管冷却器布置与换热面积计算
- 8SB/T 10300-1999 调味品名词术语 食醋
- 9公路路基施工技术规范JTGF10-2006
- 10保证工程质量的措施
- 11s195柴油机整机设计说明书
- 12NY/T 3278.2-2018 微生物农药 环境增值试验准则 第2部分:水
- 13压型钢板、夹芯板屋面构造及墙体06J925-2图集
- 14一级减速器装配图CAD图纸
- 15玉米收割机毕业设计论文