采用特种聚合物的精密磨床床身动态性能分析
- 文件大小:825.02KB
- 浏览次数:
- 发布时间:2014-03-16
本资料包含pdf文件1个,下载需要1积分
This research studied the basic properties of artificial granite composite,and compared with the basic properties of cast iron materials;precision grinder bed design criteria were discussed,and several elements affecting the dynamic stiffness of the bed were obtained.Pro/e software was used to establish precision grinder bed model,and ANSYS software was used to carry out modal analysis of different bed materials.The results show that with the same structure and size,the dynamic performance of cast iron bed is slightly better;the bed was optimized and analyzed.We found that the best dynamic performance of the bed was achieved by the use of artificial granite composite with four times thickness.研究了特种聚合物的基本性能,并与铸铁材料进行了比较;对精密磨床床身的设计准则进行了探讨,得出了影响床身动刚度的要素。利用Pro/e软件建立磨床床身的模型,用AN-SYS软件对使用不同材料的床身分别进行了模态分析。结果表明:在同等构造和体积下,铸铁床身的动态性能稍好。对床身进行了优化改造和分析,得出使用特种聚合物材料在4倍壁厚状态下床身动态性能最好的结论。
- 1GB/T 7027-2002 信息分类和编码的基本原则与方法
- 2110KV户外式无人值班变电所(施工套图)
- 3QR01.109 压力容器产品数据表
- 4后张法预应力砼预制梁监理工作程序
- 52010桥梁隧道公路工程试验检测人员业务考
- 6882.高压旋喷桩复合地基承载力试验分析(摘录自河南建材07年5期22-23页)
- 7北京简单门式钢架拆图
- 8gbt 18929-2002 联合循环发电装置 验收试验
- 9IEC 61557-1-2007 交流1000V和直流1500V以下低压配电系统电气安全 防护检测的试验、测量或监控设备 第1部分:通用要求
- 10神机妙算安全计算软件V19.0-(安全博士)-(三维显示)绿色版(原创)
- 11SB/T 11044-2013 文化主题饭店经营服务规范
- 12GB 13268-1991 大气 试验粉尘标准样品 黄土尘
- 13BS EN 12543-5-1999 Non-destructive testing Characteristics of focal spots in industrial X-ray system
- 14型材库SolidWorks设计
- 15安全管理体系与措施