氮离子注入浓度对弹条钢基体Cr/CrSiN复合涂层的摩擦学性能影响研究
- 文件大小:1.17MB
- 浏览次数:
- 发布时间:2014-03-17
本资料包含pdf文件1个,下载需要1积分
The nitrogen were implanted on the 60Si2Cr steel with different ion implantation and deposition, and Cr/CrSiN composite coatings were prepared used arc ion deposition. The sliding friction test using CETR UMT multi-specimen test system (UNT-3) in dry state with a load of 20N. The tribological properties of substrate and coatings were analyzed. The results showed that the tribologieal properties of the treated steel had im- proved significantly. With increasing of the concentration of ion implantation, the wear resistance of the coating improved. The mechanism of the CrSiN/Cr composite coatings were delamination and abrasion wear.在轨道用扣件弹条钢(60Si2Cr)上注入不同浓度的氮离子,用电弧离子镀技术沉积了Cr过渡层,并在其上制备了CrSiN/Cr复合涂层。在UMT-3多功能摩擦磨损机上对复合层进行了法向载荷为20N的摩擦磨损实验,探讨了经不同氮离子注入浓度后Cr/CrSiN复合涂层摩擦磨损行为和损伤机理,研究发现,经氮离子注入后,复合涂层表面硬度明显的增加,随着离子注入浓度的升高涂层的耐磨性逐渐提高,其磨损机制主要为剥落和磨粒磨损。
- 1DL/T 1367-2014 架空输电线路检测技术导则
- 2广联达新版软件整体解决方案暨09价目表征订大会V2.0西安
- 3DB41/T 1044-2015 设施草莓病虫害绿色防控技术规范
- 4达标路监理总结
- 5哈尔滨某职工宿舍采暖平面图
- 6大型钢屋架现场制作工法
- 7NB/T 20007.14-2010 压水堆核电厂用不锈钢 第14部分:1、2、3级奥氏体不锈钢锻、轧棒
- 8某地铁电气工程质量评估监理验收报告
- 9闵行区马桥镇彭渡村浦江北岸浦东船厂闵行分厂码头工程施工组织设计
- 10NY/T 1881.6-2010 生物质固体成型燃料试验方法 第6部分:堆积密度
- 11NB/T 20028.1-2010 核电厂用蓄电池 第1部分:容量确定
- 12第05章 项目整体管理
- 13六西格玛基础教材(绿带读本)PDF扫描版
- 14趾脚砼压顶单元工程质量评定表
- 152010年浙江省造价员考试真题基础理论(闭卷)