采煤机滑靴等离子熔覆高铬铁基合金的摩擦学性能
- 文件大小:561.76KB
- 浏览次数:
- 发布时间:2014-03-18
本资料包含pdf文件1个,下载需要1积分
采煤机导向滑靴工作环境恶劣,受力复杂,导致其经常因为磨损和开裂而失效。为提高采煤机导向滑靴耐磨性,采用等离子熔覆技术在调质45^#钢基材表面熔覆一层高铬铁基合金,在保持基体良好的综合机械性能的情况下,得到具有高强度、高硬度、高耐磨、耐腐蚀的高铬铁基合金熔覆层,既节省了合金材料的使用,又满足了煤矿复杂条件下对采煤机滑靴材料性能的要求。高铬铁基合金熔覆层在高载下具有较低的摩擦因数,可降低设备运转时的能量耗损;抗黏着磨损和磨粒磨损能力较强,可提高滑靴的使用寿命。 Coal shearer slipper is often failed because of wear and cracking caused by working at the poor and complex working conditions. In order to improve wear resistance of the coal shearer slipper,by using the plasma cladding technique to clad the layer of high-chromium alloys on the quenched and tempered 45 steel substrate, the high-chromium alloy clad- ding with high strength,high hardness,high wear resistance and corrosion-resistant was obtained on condition of maintai- ning good matrix mechanical properties, which can meet the coal shearer slipper material properties under the coal mine complex conditions. Under high load, high-chromium-based alloy cladding layer has a low friction coefficient, the energy consumption when the equipment in operation can be reduced;and has strong anti-adhesive and abrasive wear, the service life of the slipper is improved.
- 1耐高温风机图纸CAD图纸
- 2PDA道路测量计算程序
- 3XX道路桥梁排水工程施工组织设计
- 4村庄和集镇规划建设管理条例
- 5GB/T 38438-2019 电力通信网运行评估指标体系
- 62013年版《工程建设标准强制性条文》(房屋建筑部分)建筑宣贯培训班课件2
- 7椅SolidWorks设计
- 8YS/T 667.1-2008 化学品氧化铝化学分析方法第13部分:填料用氢氧化铝及拟薄水铝石中镉、铬、钒含量的测定电感耦合等离子体发射光谱法
- 9连杆图
- 10- 高速铁路预应力混凝土预制梁技术条件_征求意见稿_
- 11D101-1~7电缆敷设(2002年合订本)图集
- 12K29A直板手机三维模型ProE设计
- 13郑州站植草砖铺装工程施工方案
- 14垫圈 - GB 848-85(含16张cad图纸)
- 15YY 0028-1990 一次性使用静脉输液针