-
无相关信息
Numerical simulation of thermodynamics coupling in hot forming process of elliptical head used in power station
- 文件大小:1.74MB
- 浏览次数:
- 发布时间:2014-03-22
本资料包含pdf文件1个,下载需要1积分
To reduce the time of getting an ideal elliptical heat used in power station through repairing and testing a die repeatedly according to experience, finite element software Deform-3D was used to research the simulation of deformation-heat transfer coupling in hot forming process of elliptical head with the size of Ф1200 mm ×100 mm. The variations of stress, stain, temperature, thickness and strain rate in forming process were gotten, and the forming quality was evaluated from roundness, thinning rate and thermal contraction. The results show that the maximum thinning rate of the elliptical head is 7.31% ,it is close to the orthographic place ; and the inner diameter obtained from simulation is 1200. 6 - 1202. 977 ram, it is in the range of inner diameter tolerance required; all the data fit well with the practical dimension data of processing head.
- 1消防给水系统的维护管理
- 24吨卷扬机总图
- 3SJ 3010.1-1988 组合冲模 导柱
- 4JGJ231-2010 建筑施工承插型盘口式钢管支架安全技术规程
- 5施工现场管理制度-1201
- 6下承式钢管混凝土系杆拱桥施工方案计算(MIDAS计算)
- 7城市道路设计规范CJJ37
- 8某项目工程监理质量评估报告
- 9压块机装配图
- 10YD/T 3100-2016 cdma2000电路域与E-UTRAN的互操作空中接口信令互通性测试方法
- 11两种规格超细晶粒钢的激光焊接
- 12100m液氯储罐设计
- 13汽车拖车改装
- 14CJJ120-2008 城镇排水系统电气与自动化工程技术规程及条文说明
- 15绵阳城区景福花园5号楼街景风貌打造工程施工组织设计