基于声发射技术的点接触润滑状态研究
- 文件大小:535.5KB
- 浏览次数:
- 发布时间:2014-03-23
本资料包含pdf文件1个,下载需要1积分
为研究点接触在部分弹流润滑条件下的润滑状态,使用球盘式摩擦磨损试验机进行试验,利用声发射技术监测不同工况下的润滑状态,并分析在不同工况下声发射信号特征参数的变化规律。结果表明:声发射信号特征参数计数、能量、信号强度对润滑状态的改变非常敏感,都随滑动速度的增加而减小,随载荷的增加而增加且在变化规律上几乎一致;利用声发射技术能够表征边界润滑向部分弹流润滑的过渡状态。 Experiments were conducted on a ball-on-disc tester with acoustic emission (AE)technique to study the lubrication condition of the point contact under partial elastohydrodynamic lubrication at different test conditions, and the variation of the AE signal characteristics was analyzed under different test conditions. The results show that AE counts, energy and signal strength are extremely sensitive to the lubrication condition. In the time domain signals, those three characteristic parameters have a nearly uniform variation trend. Higher sliding speed leads to decreased values, heavier load leads to increased values. It is proved that the AE signals can characterize the transition state of boundary lubrication to partial elastohydrodynamic.
- 1制动底板的cad图纸
- 2农民工工资发放表范例
- 3GB/T 2930.11-2001 牧草种子检验规程检验报告
- 4主机接管流程图
- 5整板筏形基础
- 6古建公园公卫及配电房DWG施工图
- 7非金属薄膜生产线计算机测控系统研究和应用
- 8YD/T 1695-2007 IPTV对接入网络的技术要求(第一阶段)
- 9CJYG05010-11 CAD图纸
- 10节能的综合知识问答
- 11城市、镇控制性详细规划编制审批办法
- 12DB51/T 1516-2012 建设项目使用林地可行性论证技术规范
- 13SJ 1488-1979 反向阻断型高频半导体闸流管额定高频通态平均电流IT的测试方法
- 14YDB 040-2009 用于城域网的小型化掺铒光纤放大器(EDFA)技术条件
- 15漳州市首届装饰装修设计大奖赛方案