旋转工作台静压导轨摩擦因数测试实验研究
- 文件大小:569.37KB
- 浏览次数:
- 发布时间:2014-03-23
本资料包含pdf文件1个,下载需要1积分
旋转工作台之间的摩擦对机床整机动态性能的影响很大,是可动结合部间存在阻尼的主要原因。实际摩擦因数的大小受到接触面材料、表面粗糙度、表面平整度、接触面间的润滑状况、受载状况以及接触面间相对速度的大小等诸多因素的影响,常常与参考值有较大出入,因此有必要准确测出接触面间的摩擦因数。提出一种测试摩擦因数的思路,不需要任何辅助设备,仅仅依靠机床数控系统本身的反馈数据,即可方便地计算出旋转工作台静压导轨的摩擦因数。测试了4种不同工况下的速度一摩擦因数曲线,分析了不同油压下旋转工作台静压导轨的转速与摩擦因数的关系,为整机动力学仿真提供了基础数据。 The friction of rotational hydraulic guideway is the main cause of joint damping which has important influence on dynamic property of machine tool. The true friction coefficient is not come with the theory one as it relates to many factors such as material, roughness, lubrication, pressure and velocity of contact face. So it is necessary to get the actual friction coefficient of contact face. A new method was advanced to get the friction coefficient with the feedback data of numerical control system and any other apparent equipment was not needed. The velocity and friction coefficient curve at four different situations were measured. The connection between velocity and friction coefficient under different pressure was analyzed. It provides foundational data for dynamic simulation of the whole machine tool.
- 1公路工程项目变更情况台帐统计表
- 2建筑电气电气工程监理实施细则
- 3浅谈半行程工装在包装机上的应用
- 4石化装置定量风险评估指南
- 5图集:住宅电气安装图集全套
- 6减速箱体零件图
- 7空警2000预警机,飞机三维模型UG,NX设计
- 8f90-3电除尘器电气
- 9工程管理习题集
- 10建筑施工门式钢管脚手架安全施工技术规范 JGJ128-2010
- 11JB/T 3029-1993 龙门铣床 技术条件
- 12深圳某体育馆临时用电施工方案
- 13市政工程培训资料-通用项目部分
- 14雷蒙磨粉碎机说明书及图纸
- 15JIS G3353-1990 Welded Light Gauge H Steels for General Structures