英液压制动基础
- 文件大小:35.5KB
- 浏览次数:
- 发布时间:2017-03-10
本资料包含doc文件1个,下载需要20积分
Air brakes get more attention, but hydraulic brakes are installed on more vehicles. Understanding how they work is the first step to safe, cost-effective diagnosis and repair.
Ever wonder why there cant be just one kind of brake Its because air and hydraulic brakes each have operating characteristics that make one or the other ideal for certain applications.
In heavy-duty combination vehicles, air is the clear choice because of the large volume of liquid that would be needed to acadia all the wheel cylinders. Plus, dealing with gladhands and hoses filled with hydraulic fluid would be messy.
But for light and medium-duty straight-truck applications, hydraulic brakes offer advantages including:
Brake feel - that is, as the pedal is pressed farther down, effort increases;
High line pressures, which permit the use of lighter, more compact braking components;
Less initial expense, due to smaller and fewer components;
Cleanliness - hydraulic brakes are closed systems;
Ease of locating leaks, since fluid is visible.
There are many more permutations of hydraulic brake systems than found in air systems, but all have basic similarities.
THE HYDRAULIC SYSTEM
All hydraulic brake systems contain a fluid reservoir, a master cylinder, which produces hydraulic pressure, hydraulic lines and hoses to carry pressurized fluid to the brakes, and one or more wheel cylinder(s) on each wheel.
The wheel cylinders expand under fluid pressure, and force the brake shoes against the insides of the drums. If disc brakes are used, calipers, with integral cylinders, clamp down on the rotors when pressure is applied.
Because a vehicle must be able to stop much more quickly than it can accelerate, a tremendous amount of braking force is needed. Therefore, the retarding horsepower generated by the brakes must be several times that of the engine.
In order to develop the forces required to hold the brake linings against the drums or discs, and to achieve controlled deceleration, it is necessary to multiply the original force applied at the brake pedal.
- 1毕业设计办公楼
- 2一级建造师建筑工程实务主观题宝典
- 3中环世贸装修工程施工组织设计
- 4DB13/T 159-1993 燃煤除硫粉环保节能要求
- 5植被砼护坡绿化一般施工方案
- 6美国公路标志图集
- 7江苏省建筑与装饰工程计价表(总说明)
- 82004-12-31(校)电气符号
- 9住宅小区一期项目冬季施工方案
- 10屋面防水施工做法施工图集
- 11HJ 759-2015 环境空气 挥发性有机物的测定罐采样 气相色谱-质谱法
- 12光能扶手支架注塑件SolidWorks设计
- 1301-饮料灌装机--总装图A0
- 14HB/Z 223.18-2002 飞机装配工艺 压窝与锪窝
- 15JB/T 11576.1-2013 数控多面切削车床 第1部分:型式与参数