塑料卡扣汇总
- 文件大小:245.18KB
- 浏览次数:
- 发布时间:2017-03-10
本资料包含pdf文件1个,下载需要5积分
塑料卡扣汇总An economical and quick method of joining plastic parts is by a snap-fit joint. A snap-fit joint can be designed
so it is easily separated or so that it is inseparable, without breaking one of its components. The strength of the
snap-fit joint depends on the material used, its geometry and the forces acting on the joint.
Most all snap-fit joint designs share the common design features of a protruding ledge and a snap foot.
Whether the snap joint is a cantilever or a cylindrical fit, they both function similarly.
When snap-fit joints are being designed, it is important to know the mechanical stresses to be applied to the
snap beams after assembly, the required mechanical stresses or strains on the snap beams during assembly,
the number of times the snap joint will be engaged and disengaged, and the mechanical limits of the material(s)
to be used in the design.
Reasons to Use Snap-Fits:
· Reduces assembly costs.
· Are typically designed for ease of assembly and are often easily automated.
· Replaces screws, nuts, and washers.
· Are molded as an integral component of the plastic part.
· No welding or adhesives are required.
· They can be engaged and disengaged.
Things To Be Aware of When Using Snap-Fits:
· Some designs require higher tooling cost.
· They are susceptible to breakage due to mishandling and abuse prior to assembly.
· Snap-fitsthat are assembled under stress will creep.
· It is difficult to design snap-fits with hermetic seals. If the beam and/or ledge relaxes, it could decrease
- 1CAS 107-2006 燃油清净助燃剂
- 2单供气孔静压平面止推空气轴承静特性分析
- 30071 黔江卷烟厂施工组织设计
- 4依泉庭院一套独具风格的别墅施工图纸
- 5JIS E 1507-1995 Track gauges
- 6YS/T 500-2013 钨铈合金中铈量的测定氧化还原滴定法
- 7一级建造师管理习题12
- 8超薄层沥青混凝土面层技术研究-报告简本
- 9图像传感器三维模型SolidWorks设计
- 10CB 1339-1998 舰船电气设备基本技术要求
- 11YD/T 1832-2008 基于CDMA技术的数字集群系统设备技术要求—调度子系统
- 12全国一级建造师考试[建设工程经济]真题及答案2006年
- 13祥云苑二期经济适用房安装施工组织设计
- 14MTS800全站仪
- 15活塞运动示意(直线往复运动与旋转运动)SolidWorks设计