MAX3232手册资料
- 文件大小:268.35KB
- 浏览次数:
- 发布时间:2017-03-10
本资料包含pdf文件1个,下载需要5积分
MAX3232General Description
The MAX3222/MAX3232/MAX3237/MAX3241 trans-
ceivers have a proprietary low-dropout transmitter out-
put stage enabling true RS-232 performance from a
3.0V to 5.5V supply with a dual charge pump. The
devices require only four small 0.1µF external charge-
pump capacitors. The MAX3222, MAX3232, and
MAX3241 are guaranteed to run at data rates of
120kbps while maintaining RS-232 output levels. The
MAX3237 is guaranteed to run at data rates of 250kbps
in the normal operating mode and 1Mbps in the
MegaBaud™ operating mode, while maintaining RS-232
output levels.
The MAX3222/MAX3232 have 2 receivers and 2
drivers. The MAX3222 features a 1µA shutdown mode
that reduces power consumption and extends battery
life in portable systems. Its receivers remain active in
shutdown mode, allowing external devices such as
modems to be monitored using only 1µA supply cur-
rent. The MAX3222 and MAX3232 are pin, package,
and functionally compatible with the industry-standard
MAX242 and MAX232, respectively.
The MAX3241 is a complete serial port (3 drivers/
5 receivers) designed for notebook and subnotebook
computers. The MAX3237 (5 drivers/3 receivers) is ideal
for fast modem applications. Both these devices feature
a shutdown mode in which all receivers can remain
active while using only 1µA supply current. Receivers R1
(MAX3237/MAX3241) and R2 (MAX3241) have extra out-
puts in addition to their standard outputs. These extra
outputs are always active, allowing external devices
such as a modem to be monitored without forward bias-
ing the protection diodes in circuitry that may have VCC
completely removed.
The MAX3222, MAX3237, and MAX3241 are available
in space-saving TSSOP and SSOP packages.
- 1GB 11033.1-1989 额定电压26~35kV及以下电力电缆附件基本技术要求 总则
- 2蜘蛛消防员三维模型ProE设计
- 3建筑工程预算指标
- 4工艺流程图2带控制点
- 5高分子链的结构
- 6建筑施工现场平面图
- 7避雷计算 软件
- 8MT/T 1165-2011 液压支架立柱 千斤顶密封件 第2部分:沟槽型式、尺寸和公差
- 9GB/T 26066-2010 硅晶片上浅腐蚀坑检测的测试方法
- 10128-9除尘器
- 11广东省某大桥T梁预制与安装施工方案
- 12GB/T 11106-1989 金属粉末 用圆柱形压坯的压缩测定压坯强度的方法
- 13JB/T 6062-1992 焊缝渗透检验方法和缺陷磁痕的分级
- 14新疆徐总雅居装修设计施工图纸
- 15用光栅式指示表检定仪标定引伸计测量系统方法的探讨