DTII型固定式带式输送机的设计毕业设计
- 文件大小:914.95KB
- 浏览次数:
- 发布时间:2017-03-10
本资料包含doc文件1个,下载需要20积分
DTII型固定式带式输送机的设计毕业设计DTII型固定式带式输送机的设计
摘 要
本次设计首先对带式输送机进行了概述,包括带式输送机的应用、分类、特点及其工作原理。然后根据给定条件进行部件的选择,计算的方法。然后进行设计,计算与校核,最后进行了总结。目前我国对于带式输送机的设计水平还达不到世界先进水平,仍然存在很多不
足之处。现在我国对于带式输送机的主要研究方向在于加长运距,减少摩擦。
关键词:带式输送机 传动装置 导回装置
Abstract
The design is a graduation project about the belt conveyor. At first, it is introduction about the belt conveyor. Next, it is the principles about choose component parts of belt conveyor. After that the belt conveyor abase on the principle is designed. Then, it is checking computations about main component parts. The ordinary belt conveyor consists of six main parts: Drive Unit, Jib or Delivery End, Tail Ender Return End. Intermediate Structure, Loop Take-Up and Belt. At last, it is explanation about fix and safeguard of the belt conveyor. Today, long distance, high speed, low friction is the direction of belt conveyors development. Air cushion belt conveyor is one of them. At present, we still fall far short of abroad advanced technology in design, manufacture and using. There are a lot of wastes in the design of belt conveyor.
Keywords: the belt conveyor Drive Unit Delivery End
目 录
第-章 绪论4
1.1 带式输送机的应用 4
1.2 带式输送机的分类 4
1.3 带式输送机的发展状况 4
1.4 带式输送机的工作原理 5
1.5 带式输送机的结构和布置形式 6
第二章 带式输送机的设计计算8
2.1 已知原始数据及工作条件 9
2.2 带式输送机的计算步骤 9
第三章 驱动装置的选用17
3.1电机的选用 18
3.2 减速器的选用18
第四章 带式输送机部件的选用20
4.1 输送带21
4.2 传动滚筒22
4.3 托辊27
4.4 制动装置31
4.5 改向装置 32
第五章 其他部件的选用33
5.1 机架与中间架33
5.2 给料装置33
5.3卸料装置34
5.4清扫装置35
第六章 总结36
致谢
- 1旺海公府别墅建筑设计施工图
- 22011年监理工程师《质量、投资、进度控制》真题及答案
- 3地铁工程施工安全评价标准
- 4城市桥梁抗震设计规范(CJJ 166-2011)宣贯讲义(同济 李建中)
- 5水沟、排洪沟工程数量计算表
- 6高压旋喷桩施工方案
- 7桥隧公司张唐铁路冬季施工方案
- 8室内设计风水学2011
- 9办公文档格式全集
- 10金属材料单重
- 11板式给料机链板[加工图]
- 12路灯基础图(精华)
- 13泵用三爪联轴器基本参数和主要尺寸
- 14TeklaStructures 13.1带+++
- 15JIS K5600-4-1-1999 Testing methods for paints-Part 4:Visual claracteristics of film-Section 1:Hiding