110kV变电站设计
- 文件大小:361KB
- 浏览次数:
- 发布时间:2012-09-13
本资料包含doc文件1个,下载需要20积分
110kV变电站设计随着经济的发展和现代工业建设的迅速崛起,供电系统的设计越来越全面、系统,工厂用电量迅速增长,对电能质量、技术经济状况、供电的可靠性指标也日益提高,因此对供电设计也有了更高、更完善的要求。设计是否合理,不仅直接影响基建投资、运行费用和有色金属的消耗量,也会反映在供电的可靠性和安全生产方面,它和企业的经济效益、设备人身安全密切相关。
变电站是电力系统的-个重要组成部分,由电器设备及配电网络按-定的接线方式所构成,他从电力系统取得电能,通过其变换、分配、输送与保护等功能,然后将电能安全、可靠、经济的输送到每-个用电设备的转设场所。作为电能传输与控制的枢纽,变电站必须改变传统的设计和控制模式,才能适应现代电力系统、现代化工业生产和社会生活的发展趋势。随着计算机技术、现代通讯和网络技术的发展,为目前变电站的监视、控制、保护和计量装置及系统分隔的状态提供了优化组合和系统集成的技术基矗
随着电力技术高新化、复杂化的迅速发展,电力系统在从发电到供电的所有领域中,通过新技术的使用,都在不断的发生变化。变电所作为电力系统中-个关键的环节也同样在新技术领域得到了充分的发展。
[关键词] 变电站 输电系统 配电系统 高压网络 补偿装置
Abstract
Along with the economic development and the modern industry developments of quick rising, the design of the power supply system become more and more completely and system. Because the quickly increase electricity of factories, it also increases seriously to the dependable index of the economic condition, power supply in quantity. Therefore they need the higher and more perfect request to the power supply. Whether Design reasonable, not only affect directly the base investment and circulate the expenses with have the metal depletion in colour metal, but also will reflect the dependable in power supply and the safe in many facts. In a word, it is close with the economic performance and the safety of the people.
The substation is an importance part of the electric power system, it is consisted of the electric appliances equipments and the Transmission and the Distribution. It obtains the electric power from the electric power system, through its function of transformation and assign, transport and safety. Then transport the power to every place with safe, dependable, and economical. As an important part of powers transport and control, the transformer substation must change the mode of the traditional design and control, then can adapt to the modern electric power system, the development of modern industry and the of trend of the society life.
Along with the high and quick development of e
- 1住宅cfg桩基工程监理实施细则
- 2LMC9-170长袋脉冲袋除尘器
- 3GB/T 23583.1-2009 钢液浇包 第1部分:型式与基本参数
- 4中国华西五公司应急准备和响应方案
- 5细木花饰工程木窗帘盒、金属窗帘杆安装工艺标准.doc
- 6SJ 50597.49-1997 混合集成电路HCHF01型差频和上下分离电路详细规范
- 7GB/T 5546-1985 树脂整理剂中不挥发组分的测定方法
- 8常用符号及美制螺纹计算
- 99、钢结构算量基本知识[1]
- 10油脂精炼工艺文本资料
- 11GB/T 2269-91 机床夹具零件及部件 镗套螺钉
- 1265m2脱气釜CAD图纸
- 13发酵车间立面布置图
- 14张拉交底
- 15图纸燃气闸阀