数控车床四工位回转刀架机电设计
- 文件大小:317KB
- 浏览次数:
- 发布时间:2013-01-04
本资料包含doc文件1个,下载需要20积分
自动回转刀架CNC lathe work order to be able to complete a fixture in many processes processing aids to reduce time, reduce installation time and again caused by processing errors, we must turn with automatic tool. Installed in accordance with the number of different knives, automatic revolving turret at position four of six and eight-station work spaces and other forms. According to the different installation methods, automatic rotary tool can be divided into two types of vertical and horizontal. Positioning means according to the different mechanical, automatic rotary tool set can be divided into client positioning tooth and three teeth, such as disk-based positioning. The interruption of tooth plate-type tool change position to be lifted when the tool carrier, tool change a slow and poor sealing, but its relatively simple structure. Tridentate known disk-based location-free lift-type, characterized by ATC when the tool is not lifted, so when the tool change is fast and good seal, but its more complicate
structure.
Automatic rotary tool in the structure must have good strength and rigidity to bear the rough at the time of cutting resistance. In order to ensure a high transposition of the repeat positioning accuracy, automatic rotary tool holder of the position would also like to choose a reliable and reasonable positioning program structure. Rotary Tool Automatic Tool Changer automatically by the control system and the drive circuit to achieve.
Keywords: automatic rotary tool, vice worm, Electromechanical system
目 录
第1章 绪论 2
1.1 课题综述 2
1.1.1 科学意义和应用前景 2
1.1. 2 设计思路 3
第2章总体结构设计 4
1.1减速传动机构的设计 4
1.2 上刀体锁紧与精定位机构的设计 4
1.3 刀架抬起机构的设计 4
第3章自动回转刀架的工作原理 5
第4章 主要传动部件的设计计算 8
1.1 蜗杆副的设计计算 8
1.2 螺杆的设计计算 12
第5章 电气控制部分设计 13
1.1 硬件电路设计 13
1.2 控制软件设计 15
致 谢 17
参考文献 18
- 1最新脉冲电子围栏系统方案
- 2《水利水电工程标准施工招标资格预审文件》(2009年版)
- 3基于神经网络的磨削工艺参数智能预测模型
- 4工程定额及造价资料电子查阅系统和谐版
- 5欧尚风景二期经典室内装修施工图纸
- 6铣刀头CAD图纸
- 7DMC60除尘器总装图
- 8GB 5175-2000 食品添加剂氢氧化钠
- 9EN 10210-1-1994 非合金及细晶粒结构钢的热轧结构空心型材 交货技术条件
- 10压料油缸总成
- 11GB/T 13255.3-2009 工业用己内酰胺试验方法 第3部分:高锰酸钾吸收值的测定 分光光度法
- 12雅虎域名注册详细教程
- 13铃木发动机SW模型
- 14北京某公寓电气施工组织设计(水暖电)
- 15ZSC系列圆柱齿轮减速机使用说明书