工程机械齿轮泵侧板加工工艺设计
- 文件大小:745.16KB
- 浏览次数:
- 发布时间:2017-02-07
本资料包含pdf文件1个,下载需要1积分
分析了侧板的形状结构、精度要求和加工特征;用2次回火工序消除加工应力,去除侧板平面变形:用加工中心、普通车床分别加工异形截面的侧板外形和内腔,保证了加工精度,提高了效率;根据多次试制经验,设计了侧板的加工工艺。实践证明其工艺设计合理,完全保证了侧板的技术质量和大批量生产要求。
The precision requirements and maehining features of side plank with different figures were analysed. The plane deformation was eliminated by twice tempering process. The outer shape and inner cavity of special cross section of side plank were processed by machining center and ordinary Lathe, respectively. It ensured the machining accuracy and improved efficiency. Based on the series of trial experience, the machining process of side plank was designed. The results showed that this reasonable process design ensured the technical quality of side plank and the requiremeuts tot mass production.
齿轮泵侧板,技术分析,工艺设计,gear pump side plank,technology analysis,process design。
工程机械齿轮泵侧板加工工艺设计。
- 1四会市某高层住宅地下车库通风排烟图
- 2剪力墙边缘构件配箍率计算(新根据抗震规范2010编写的边缘构件配箍计算表_)
- 3油墨废气处理设备布置图+处理工艺图
- 4SJ/T 10303-1992 48XW1515型录像机用磁鼓电动机
- 5北青广场五层商业办公楼采暖工程平面图
- 6GB/T 11060.2-2008 天然气 含硫化合物的测定 第2部分:用亚甲蓝法测定硫化氢含量
- 7农居房建筑施工图
- 8游园餐厅绿化平面cad图纸
- 9CASIO_fx-5800P编程计算器公路与铁路施工测量程序01
- 10JIS B8381-1995 气动系统.挠性管.管接头
- 11【工程图库】某大学体育馆屋顶网架图
- 12真空夹紧三维图
- 13YC/T 468-2013 烟草及烟草制品 总植物碱的测定 连续流动
- 14雕刻全套机图
- 15双桨飞机三维模型ProE,CreoElements设计