基于绿色制造的深孔加工附件设计
- 文件大小:268.03KB
- 浏览次数:
- 发布时间:2014-12-16
Design of Deep-holes M achining Accessories Based on Green M anufacturingZHANG Meng ,WU Fujia(1.School of Mechanical and Electrical Engineering,North University of China,Taiyuan Shanxi 03005 1,China;2.School of Mechanical and Electrical Engineering,Xian Technological University,Xian Shaanxi 7 1 0032,China)Abstract:A set of deep-hole machining accessories for internal chip remov and cooling was designed by using one kind of microspraying cutting-fluid,and its working principle,implementation method and structure principle of its subassembly of high-pressurespray equipment,rotary joint and simple oil transmission device were analyzed.Results of the machining experiments show that thepurpose of reducing costs and energy consumption in deep-hole machining cal be achieved by using this accessory。
Keywords:Deep-hole machining;Green cuting technology;Internal chip removal;High-pressure spray equipment深孔加工难度大且专业化程度高,需使用专用的深孔刀具及机床,而深孔加工装备行业处于垄断状态,装备产品的价格居高不下,绝大多数企业既买不起,也用不起,只能望洋兴叹;另外,加工中要以高压切削液来冷却润滑刀具,并带走切屑,这不仅要消耗大量切削液,增加制造成本,而
- 1池州广电大厦建筑图纸
- 2水利工程施工监理规范表格
- 3河南某厂区职工食堂建筑施工图及总平面图
- 4SJ 1558-1980 MF41型和MF44型旁热型负温度系数热敏电阻器
- 511.建筑工程预防坍塌事故若干规定
- 6GB/T 32314-2015 商业银行客户服务中心服务外包管理规范
- 7大掺量粉煤灰水泥砼路面的研究与应用
- 8五层办公楼电气设计图
- 9压装液压压力机系统设计
- 10振型分解反应谱法讲义
- 11建筑施工安全管理人员联系表
- 12DL/T 5226-2013 发电厂电力网络计算机监控系统设计技术规程
- 13建设部建筑安装工程劳动保险费用管理办法
- 14LY/T 2278-2014 中国森林认证 森林公园生态环境服务审核导则
- 155.5拉刀