聚四氟乙烯金属网罩软管失效分析
- 文件大小:1.37MB
- 浏览次数:
- 发布时间:2014-09-17
文件介绍:
本资料包含pdf文件1个,下载需要1积分
对破裂的聚四氟乙烯金属网罩软管进行失效分析,采用扫描电镜观察软管断口,确定软管的断裂属于瞬间压力过高,导致的脆性断裂;应用FLUENT和ABAQUS对实际工况时的管道内流速、压力分布以及应力分布进行分析模拟,从而确定软管前端阀门关闭过快产生较高的锤击压力导致该软管发生破裂。
This paper makes the failure analysis of broken polytetrafluorethylene (F4) metal sereened hose tube. The image of this cross-section is shown and It is determined that the brittle fracture of this hose tube is caused by the instantaneous over pressure. FLUENT and ABAQUS are used to simulate the flow rate, pressure and stress distribution. The conclusion can be drawn that the brought due to fast cutting the front valve off causes hammer pressure the fracture of the F4 metal sereened hose tube.
软管,失效分析,锤击,hose tube, failure analysis, hammer。
聚四氟乙烯金属网罩软管失效分析。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1锅炉房工地施工组织设计
- 2先张法预应力混凝土管桩GB13476-1999
- 3浅谈无砟轨道CA砂浆施工
- 4布加迪威航SketchUp设计
- 5东方润园小区室内装修设计施工图
- 6工作台三维模型SolidWorks设计
- 7JB/T 10845-2008 无铅再流焊接通用工艺规范
- 8市政及高速公路桥梁检测培训
- 9一级减速器零件图、装配图
- 10波烽焊机头、机尾工程图
- 1120110621招标图纸:地下室抗浮锚杆ok
- 12无线列调安装作业指导书整理版
- 13DL/T 1932-2018 6kV~35kV电缆振荡波局部放电测量系统检定方法
- 14CB/T 1036-1997 船用板式热交换器
- 15济南市小清河综合治理历山北路原板桥拆除施工方案