热门关键词:

基于AMESIM的注塑机管道设计的节能研究

  • 该文件为pdf格式
  • 文件大小:275.96KB
  • 浏览次数
  • 发布时间:2014-09-16
文件介绍:

本资料包含pdf文件1个,下载需要1积分

Energy Conversation Research of the Pipeline Design of PlasticInjection Molding Machine based on AMESIMYANG Chao ,SONG Chun。hua ,WEI Xing-ping ,、LIU Xiao li ,SONG Chang。lin(1.School of Mechanical Engineering and Automation,Xi Hua University,Chengdu 610039,China;2.Chongqing Industrial Technician College,Yongchuan 402160,China)Abstract:AMESIM software was used to make a model of clamping system of SZ。250A。type injectionmolding machine. Simulation and analysis were made by seting different parameters of the pipe length anddiameter. The calculation of the output energy consumption of the big and smal flow pumps showed that withthe increasing of the pipe length,the energy consumption of the injection molding machine increased;withthe increasing of the pipe diameter,the energy consumption of the injection molding machine reduced.Thepressure loss and response speed were analyzed under the diferent pipe length and diameter of injectionmolding machine。

Keywords:AMESIM;Injection Molding Machine;Energy Conversation近年来,我国在液压注塑机节能方面的研究已经取得了显著成绩 I2 J。早在 2O世纪9O年代,我国就成功研制出了变量泵节能型注塑机,与常规注塑机相比,节省能耗高达25%-45%。自2002年开始,我国有多家注塑机厂开发节能型注塑机,其中主要有普通电机加变频器开环控制节能注塑机、变频电机加变频器闭环控制节能注塑机以及伺服电机加伺服驱动器闭环控制节能注塑机。值得-提的是,宁波海太机械有限公司开发的伺服控制节能注塑机被国家科技部列为 国

正在加载...请等待或刷新页面...
发表评论
验证码 验证码加载失败