空间用薄膜电加热器设计及热均匀性测试
- 文件大小:1.08MB
- 浏览次数:
- 发布时间:2014-08-10
本资料包含pdf文件1个,下载需要1积分
针对空间飞行器用薄膜电加热器的实际需求,设计了不同的布线形式,并分别对其进行了数值求解和参数化绘图。使用红外热像仪对所生产电加热器样品的温度场进行了测试,结果表明电加热器温度场在单条水平线内的方均根差在2.79%以内,热均匀性较好,方程求解和绘图设计合理。此方法可应用于薄膜电加热器快速布线设计,电加热器热均匀性能够满足较高的加热控制需求。
According to the actual requirements of spacecraft, different patterns are designed for the film-circuit heater. Two kinds of equations are solved using the numerical approximation method and the circuit diagrams are drawn based on the solutions of the equations and the drawing codes. Temperature data of heater samples are acquired via the infrared camera and an analysis of heating uniformity is conducted. It is shown that the heating uniformity of the film-circuit heater is good, and that the solutions of the equation and the graphics drawing program is reliable. The method presented in this paper can be applied to the design of the film-circuit heater, used in the field of high precision temperature control.
薄膜电加热器,布线设计,热均匀性,数值分析,参数化绘图,红外热像仪,film-circuit heater,configuration design,thermal uniformity,numerical analysis,parameter drawing,infraredcamera。
空间用薄膜电加热器设计及热均匀性测试。
- 12011年一级建造师《建设工程法规及相关知识》冲刺训练(1-20)
- 2RubberU-DISK,橡胶U盘三维模型ProE设计
- 3纸厂联合厂房及热电站建筑工程施工方案
- 4工程安全文明施工协议书
- 5地下水流动问题数值方法--陈崇希
- 6襄阳农工国际大酒店宴会厅装修设计施工图纸
- 7GB/T 17616-1998 钢铁及合金牌号统一数字代号体系
- 8液压冲床三维模型UG/NX模型设计
- 9幕墙、外墙、外装饰工程施工组织设计(铝板、石材、玻璃了、雨棚)
- 10最新基建工程管理百科
- 11关于钢吊箱围堰的资料
- 12机械手----自动取料cad图纸
- 13GB/T 26103.5-2010 NGCLZ型带制动轮鼓形齿式联轴器
- 14高速防护填方:扶壁式挡土墙设计图
- 15车载充电器proe设计