- 1JIS R1654-2003 Testing method for wear r
- 2JIS R1652-2003 Method for measurement of
- 3JIS R1618-2002 Measuring method of therm
- 4JIS R1613-2002 Testing method for wear r
- 5JIS R1604-1995 Testing method for flexur
- 6JIS R1601-1995 Testing method for flexur
- 7Study and application of monitoring plan
- 8Analysis of Electroencephalogram Based o
- 9Influence of Loads and Sliding Speed on
- 10Research on goal-setting method of rock
Aqueous Based ExtrusionFabrication of Ceramics on Demand
- 文件大小:433.52KB
- 浏览次数:
- 发布时间:2012-05-04
本资料包含pdf文件1个,下载需要1积分
Aqueous Based ExtrusionFabrication of Ceramics on Demand
reservoir plunger. This would in theory reduce the applied pressure, thereby stopping
material extrusion.
In this paper material deposition tests are conducted, where the ram extruder
retreating velocity is varied in order to develop a technique that can be used for
starting/stopping the extrusion process on demand. A new extrusion mechanism is
designed to improve process capabilities. Parts are then fabricated with the use of
starting/stopping the extrusion on demand with emphasis being placed on deposition of
sharp corners and edges.
Figure 1: Schematic showing the location of the die land for an extrusion nozzle.
Figure 2: Photograph of the ABEF system used in this study.
Ram Axis
Material
Reservoir
X-Axis
Y-Axis
Z-Axis
- 1北京城市的开放空间和景观设计_以王府井商业街为例
- 2某中式高档仿古别墅全套施工图
- 3GB 25326-2010 铝及铝合金轧、拉制管、棒材单位产品能源消耗限额
- 4脚手架的计算规则
- 5锁风闪动阀全套图纸
- 6GB 50377-2006 选矿机械设备工程安装验收规范
- 7消火栓通用节点大样设计cad图纸
- 8GB/T 14372-2005 危险货物运输爆炸品认可、分项试验方法和判据
- 9自动变速器电控系统的硬件电路
- 10便携式工程机械液压系统故障检测仪
- 11砖石基础砌筑施工工艺标准(QB-CNCEC J010501-2004)
- 12现代露营帐篷设计su模型(版本106)
- 13YS/T 861.5-2013 铌钛合金化学分析方法 第5部分:钛量的测定硫酸铁铵滴定法
- 14飞机SolidWorks设计
- 15击实试验报告(灰土)竣工资料方面