基于约束力旋3SPS+UP并联机构刚度和弹性变形
- 文件大小:204.32KB
- 浏览次数:
- 发布时间:2014-03-07
本资料包含pdf文件1个,下载需要1积分
In order to solve the stiffness and elastic deformation problems with a 3SPS+UP limiteddegree-of-freedom parallel manipulators,this study derives the general stiffness matrix and the elastic deformation using an active/passive constraint leg method.After the analysis of the force situations of 3SPS+UP PMs,the poses of the active/constraint wrench are obtained.In addition,the elastic deformations of the active/constraint legs of 3SPS+UP PMs are analyzed,and the compliance matrices of the active/constraint legs are derived.The results demonstrate that the constraint wrench of 3SPS+UP parallel manipulators will have a big impact on the elastic deformation.The study concludes that when the total stiffness matrix of the 3SPS+UP parallel mechanism is established and the elastic deformation is solved,the constrained wrench must be considered.针对具有约束分支的3SPS+UP少自由度并联机构刚度与弹性变形问题,采用基于主动/被动约束力旋求解其总刚度矩阵和弹性变形的方法.结果表明:对3SPS+UP并联机构的受力状态进行分析,并确定主动/约束力旋的姿态,分析3SPS+UP并联机构的主动/约束分支的弹性变形,导出主动/约束分支的伴随矩阵,约束力旋对3SPS+UP并联机构的弹性变形有巨大的影响.得出结论:当建立3SPS+UP并联机构的总刚度矩阵和求解弹性变形时,必须考虑约束力旋.
- 1综合楼废水池工程施工组织设计方案
- 2某基础技术资料管理制度
- 3CJ 25.1-1989 生活杂用水水质标准
- 4超高液压螺栓拉伸器的安全系数评定与试验研究
- 5箱梁预应力施工作业指导书整理版
- 6北方地区精品住宅楼小区全套cad设计图纸
- 7JB/T 9262-1999 工业玻璃温度计和实验玻璃温度计
- 8FZ/T 92052-1995 轴承内径φ12mm环锭锭子
- 95287_山东省建筑做法图集L06J002
- 10工程部管理制度(修改)
- 11国家职业技能标准 (2019年版) 矫形器装配工
- 12南方测图精灵 2005+++文件
- 13y(12)氨泵、循环桶Ⅰ-Ⅰ剖面图4
- 14DB37/T 3568.4-2019 绿色照明LED灯具 第4部分:LED工矿灯
- 15黑红深色调-休闲会所效果图