高速轮轨材料匹配的滚动接触磨损性能
- 文件大小:1.33MB
- 浏览次数:
- 发布时间:2014-03-07
本资料包含pdf文件1个,下载需要1积分
In order to study the influence of matching of high-speed wheel/rail steels on the rolling contact wear properties of frictional pairs of wheel/rail, three high-speed wheel steels which are respectively matched with rail steels and the wear rate of these frictional pairs is measured by using rolling/sliding wear machine. The effects of chemical compositions of wheel steels on their mechanical properties and the roiling contact wear of wheel/rail frictional pairs are investigated. The results show that the strength and wear resistance of a modified wheel steel which increases carbon content based on conventional wheel steel is improved, while the ductility and toughness of which decreases. The strength and wear resistance of another modified wheel steel whose alloy content is appropriately adjusted based on conventional wheel steel is improved more effectively, with almost unchanged ductility and toughness. The wear resistance of wheel steels is not affected by strain hardening under rolling/sliding conditions, while it is dominated by the pre-hardness of wheel steels. The wear rate of rail steel increases linearly with the hardness of the corresponding wheel steel rising.为了研究高速铁路轮轨材料匹配对轮轨摩擦副滚动接触磨损性能的影响,将三种高速车轮材料分别与钢轨材料匹配,利用滚动接触摩擦磨损试验机测试各摩擦副磨损率,比较研究成分变化对车轮材料力学性能和轮轨摩擦副滚动接触磨损性能的影响。结果表明,在常规的高速车轮材料中增加碳的质量分数能提高材料的强度和抗磨损性能,但材料塑韧性下降;在常规的高速车轮材料中适当地调整合金成分的质量分数能更大幅度地提高材料强度和抗磨损性能,同时保持材料塑韧性基本不变。滚滑条件下,车轮材料应变硬化程度的高低不影响车轮材料的抗磨损性能,试验前车轮材料初始硬度的高低是决定其抗磨损性能的主要因素。钢轨材料的磨损率随对应车轮硬度的增加而增加,且近似呈线性关系。
- 1机械工业企业产品质量事故分类 JB_T 5057-2006
- 214建设工程职工伤亡事故调查报告书
- 3GB/T 33290.3-2016 文物出境审核规范 第3部分:法器
- 4野三河水电站混凝土工程施工监理实施细则
- 5GB/T 22392-2008 摄影 加工用化学品 对苯二酚
- 6SY/T 5046-2005 地震检波器
- 7传动轴设计计算
- 8津06G305 预制钢筋混凝土空心方桩
- 9车工技师培训教材
- 1001管道沟槽砼包管回填检验批质量验收表
- 11建设单位人防工程竣工验收报告(范本)
- 12无线基站铁塔制造安装质量控制要点
- 13测量施工方案1
- 14DB13(J)/T 143-2012 储罐式氮气灭火系统技术规程
- 15合作合同(上海)