影响含腐蚀缺陷管道剩余强度的参数分析
- 文件大小:283.7KB
- 浏览次数:
- 发布时间:2014-03-10
本资料包含pdf文件1个,下载需要1积分
The influence of the parameters including bulging factor,flow stress,corrosion area and defect shape on the remaining strength of pipeline are compared among the several popular methods,such as ASME B31G,API 579,DNV RP-F101 and PCORRC.The results show that the higher the pipeline steel grade is,the differences among the flow stresses defined from different assessment methods will be less significant.Formula NG-18 can only used in case of defects with short length.Comparing the results from the above four assessment methods with explosion tests,the error amounts from ASME B31G method is larger than the results from DNV RP-F101 and PCORRC methods.对比ASMEB31G,API579,DNVRP-F101,PCORRC等评价方法中的鼓胀因子、流变应力、腐蚀面积、缺陷长度等参数对管道剩余强度的影响。分析表明:管材的级别越高,不同标准之间的流变应力的定义的差异越小;NG-18公式仅适用于短缺陷;与实际爆破试验数据相比,ASMEB31G标准相对误差较大,DNVRP-F101和PCORRC标准评价结果相对误差较小。
- 1DB51/T 430-2004 无公害农产品生产技术规程 大白菜
- 2同轴式齿轮减速器设计方案
- 3北下、西南下防护方案(综合)2009.06.26
- 4水量计算表
- 5GB 19430-2004 柠檬酸工业污染物排放标准
- 6某装饰有限责任公司湖北仙居顶风电工程项目部大悟装修工程施工组织设计
- 7双壁钢围堰施工要点及拆除方案
- 8笼粉破碎机总图
- 9自然风喷泉雕塑设计su模型
- 10合生居住小区园林工程施工设计方案
- 11DB13/47-1991 工业锅炉运行监测
- 12DB22/T 2351-2015 柞蚕品种 选大1号
- 13天正教程
- 14锅炉辅助设备安装工程检验批质量验收记录表(Ⅰ)
- 15DB13/T 1771-2013 医院保洁服务规范