基于CAE技术的具有回转轴线容器件吹塑成型时的数值分析
- 文件大小:227.52KB
- 浏览次数:
- 发布时间:2014-03-12
文件介绍:
本资料包含pdf文件1个,下载需要1积分
With the study of a certain revolving axis container ,and the expatiation to the melt flow equation simplified conditions on the cavity of embedded part, and the mutant resistance coefficient change theory of medium-size cavity at the fluid mechanics, the embedded part of plastic parts site material flow situation. The intension was validated with the use of CAE technology. The results showed that the use of the analytical method can be as the instruction for the reasonable selection of process parameter in the blowing from the extrusion profile.以具有转轴线的容器件作为研究对象,利用熔体流动方程简化条件,液体力学中型腔面积突变时阻力系数变化理论,对塑件相关部位料流流动状况等进行分析;并利用CAE技术对该分析方法的正确性验证。结果表明,该分析方法可以用于指导吹塑成型工艺参数的合理选取。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1日本工业标准JIS-R-1602-1995《精细陶瓷弹性模量的测试方法》中文译文
- 2GB/T 15462-1995 电子设备用机电开关 第3-1部分:成列直插封装式开关 空白详细规范
- 3HJ 75-2017 固定污染源烟气(SO2、NOX、颗粒物)排放连续监测技术规范
- 42011全国造价工程师执业资格考试模拟试卷-基础理论与相关法规模拟试卷(一)(天津理工大学)
- 5GB 11527-1989 车间空气中碳化硅粉尘卫生标准.
- 6GB/T 18491.1-2001 信息技术 软件测量 功能规模测量 第1部分:概念定义
- 7施工阶段监理现场用表(第四版)使用须知
- 82012 二级建造师 机电 精讲 第33讲(视频课件)
- 9某小区规划设计总平面图(版本43)
- 101#楼一层平面图
- 11超深人工挖孔桩专项施工方案
- 12桥梁清水混凝土施工工艺控制技术
- 13大唐三塘湖风电场一期49.5MW工程监理规划
- 14JB/T 11358-2013 小型齿轮减速交流电动机技术条件
- 15城市规划与古建筑保护