高精度激光加工设备隔振系统的设计
- 文件大小:639.17KB
- 浏览次数:
- 发布时间:2014-03-12
本资料包含pdf文件1个,下载需要1积分
With the continuous improvement of the accuracy requirements of the laser processing,the stability of the processing equipment are more and more attention.The finite element method is used to analysis the natural frequency and harmonic analysis for high-precision laser processing equipment,and using the air spring to vibration damping for the entire system.The study results showed that the laser processing equipment having a higher natural frequency,the system is more stable when the external excitation frequency is significantly smaller than the first natural frequency,and the damping effect of the air spring under different vibration frequencies are very well,and meet the damping requirements.随着激光加工精度要求的不断提高,加工设备系统的稳定性问题受到越来越多的重视。利用有限元方法对高精度激光加工设备的固有频率和谐响应进行了分析,并采用空气弹簧对整个系统进行减振处理。研究结果表明该激光加工设备具有较高的固有频率,当外部激励频率明显小于一阶固有频率时系统较稳定,并且不同振动频率下空气弹簧的减振效果均较高,满足设备的减振要求。
- 1SCZ双端面结构示意图
- 2LY/T 2817-2017 山桐子栽培技术规程
- 3双座太空飞机造型3dsmax设计
- 4JIS C 8147-2-2-2011 灯控制设备.第2-2部分:白炽灯用交流或直流电子降压转换器的详细要求
- 5DB50/T 36-2008 棉胎技术条件
- 6幕墙节点cad
- 72011二级建造师_机电_习题班_第9讲_
- 8JB/T 9664-1999 电控设备用无焊绕接连接一般要求及试验方法
- 9桩筏基础设计理论
- 10高效液相色谱仪的维护
- 11江苏省质量通病防治手册
- 12欧式构件庭院产品图CAD图纸
- 13GB/T 11074.5-1989 氧化钐化学分析方法 钼蓝光度法测定酸溶硅量
- 14某景观围墙su模型(版本2)
- 15SJ 431-1973 “O”型返波管各极电压和电流的测试方法