轴承钢GCr15的生物油空化腐蚀特性研究
- 文件大小:1.02MB
- 浏览次数:
- 发布时间:2014-03-12
本资料包含pdf文件1个,下载需要1积分
It was studied the cavitation corrosive wear of a GCr 15 bearing steel in a emulsification fuel with 5 wt% biomass oil using a magnetostrictive-induced cavitation vibratory apparatus to simulate the cavitation conditions. The results showed that the cumulative mass loss of bearing materials first increased and then decreased because of the variation of microjet impact as the temperature was increased. The microjet of fuel would cause the biggest impact wear when the fuel temperature was at 45℃. Accordingly, the cumulative mass loss and the cumulative mass loss of bearing material reached their highest values at 45 ℃.以5wt%乳化生物质燃油为空化介质,采用磁致伸缩仪模拟空化条件,探讨了轴承材料(Gcr15)的空化腐蚀磨损特性。结果表明:乳化生物质燃油温度升高时,射流冲击强度先增大后减小,导致轴承材料的累积失重量先增大后减小,在45℃时微射流对材料冲击破坏程度最大.空化与腐蚀磨损的双重作用也达到了最大,轴承材料的累积失重量达到峰值。
- 1GB/T 18247.1-2000 主要花卉产品等级 第1部分 鲜切花
- 2钢筋工程安全技术交底.
- 3电梯工程施工组织设计
- 4喷漆机械手装配图
- 5YB2 500电机装配图
- 6JT/T 33.27-1993 交通行业工人技术等级标准 公路工程与航务工程 水泥混凝土搅拌设备操作工
- 7螺旋技术软件
- 8路桥施工现场十大员技术操作标准规范—质量员
- 9高架桥施工组织设计建议书
- 10家具植物等平面图库
- 11家装房屋风水学
- 12FGD吸收塔制作图CAD图纸
- 13设施设备管理指南空调系统(新)
- 14北京市道路及综合管线(1标段)市政工程施工组织设计
- 15JIS K2395-2009 汽车燃料系统的水溶剂(修改件1)