零件斜面交线坐标的求解及其尺寸的测量
- 文件大小:1.33MB
- 浏览次数:
- 发布时间:2014-03-13
文件介绍:
本资料包含pdf文件1个,下载需要1积分
Taking the punch parts as an example, three methods of determining the location of the oblique line, the instrument measurement method in the design phase and the trial production period, the comparative measurement method that can rapidly get the measurement results in mass production, the unrestricted indirect measurement method in processing cycle were discussed.以冲头零件为例,论述准确确定斜面交线位置的3种确定(测量)方法:设计阶段和试生产期间的仪器测量法;大批量生产过程中能迅速反馈测量结果的比较测量法;加工过程中不受限制的间接测量法。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1JB/T 12032-2015 喷油泵出油阀偶件可靠性考核 评定方法、台架试验方法及失效判定
- 2杭州某独立山地别墅建筑设计CAD图纸(版本11)
- 3南京邮电大学操场屋盖与墙面钢结构设计施工cad图纸
- 4GB/T 18443.8-2010 真空绝热深冷设备性能试验方法 第8部分:容积测量
- 5施工组织设计模板学习资料
- 6地质调查项目预算标准(2020年试用)
- 7DB22 164-1998 民用建筑节能设计标准(采暖居住部分)吉林省实施细则
- 8105个化工设备工作原理图(动画)
- 9某厂房计算书和建筑结构全套施工图
- 10DB36/T 1214-2019 地理标志产品 石城白莲
- 11大孔树脂吸附纯化桑黄粗多糖的研究
- 12建筑工程法律法规-验收规范
- 13二级齿轮减速器装配图及零件图四套
- 14荣华立井洗煤厂主厂房配电措施
- 15贝雷栈桥计算及施工方案