球面滚子的热弹流研究
- 文件大小:1.75MB
- 浏览次数:
- 发布时间:2014-03-15
本资料包含pdf文件1个,下载需要1积分
Using finite line EHL numerical model, the lubrication properties of spherical rollers were studied. It is concluded that the lubrication of spherical rollers performs as point EHL characteristics when the actual contact length is smaller than the nominal contact length~ while with the increase of the elliptical ratio or load, it transforms to line EHL, i. e. , edge pressure rising and edge film droping down, and the appear- ance of edge effect is always corresponding to the disappearance of endclosure. Therefore, enough nominal contact length should be given in the design of such friction pairs.采用有限长弹流润滑模型分析研究了球面滚子的润滑问题。研究表明:当实际接触长度小于名义接触长度时,球面滚子的润滑具有点接触弹流特征;随椭圆比或载荷的增大,球面滚子的润滑状态由点接触润滑状态向线接触润滑状态转变,出现端部压力升高和端部膜厚减小的现象,并且边缘效应的出现总是与端部膜形闭合效应的消失相对应,得出了设计此类接触副时应保证足够的名义接触长度的结论。
- 1电线电缆好坏判别
- 2DB50/T 908-2019 养老机构等级划分与评定
- 3220kV变电站带电作业机器人的研制
- 4GB/T 7739.1-2007 金精矿化学分析方法 第1部分:金量和银量的测定
- 5GB/T 24998-2010 纸和纸板 碱储量的测定
- 6水利水电工程单元工程施工质量验收评定标准 SL633-2012
- 7外墙大模内置技术交底
- 8淮海大道道路绿化种植设计施工图纸
- 9润滑脂与轴承运转温度的相关性试验研究
- 10发动机壳SolidWorks设计
- 11机电工程管理与实务 第三版
- 12JB/T 12474.10-2015 焦炉机械 第10部分:捣固机
- 13QQ stl格式
- 14干挂花岗岩幕墙节点CAD图纸(版本1)
- 15合肥金谷产业公园定位与营销策略执行报告