Effects of automatic variable preload device on performance of spindle
- 文件大小:596.01KB
- 浏览次数:
- 发布时间:2014-03-23
本资料包含pdf文件1个,下载需要1积分
To increase the machine accuracy by improving the stiffness of bearings, a preload was applied to bearings. A variable preload technology was necessary to perform machining processes in both low and high speed regions. An automatic variable preload device was fabricated using an eccentric mass. By installing the fabricated device on a spindle, the effect of the automatic variable preload device on the performance of the spindle was analyzed. In the results of the vibration measurement of the spindle, the vibration is increased by 20%-37% according to measurement points at the maximum rotation speed of 5 000 r/min. And, in the results of the noise measurement of the spindle, the spindle rotation speed is increased by about 1.9% and 1.5% at the front and side of the spindle, respectively. Based on the results of this analysis, an improved method that reduces such effects on the performance of the spindle is proposed.
- 1青岛某高层(19层)酒店爆破拆除施工方案
- 2DB52/T 1130-2016 贵州天气术语
- 3festo气缸
- 4服装厂建筑图
- 5DB34/T 2179-2016 猕猴桃栽培技术规程
- 6SJ/T 31341-1994 Logpoint2型灯光插件台完好要求和检查评定方法
- 72012全国一级建造师市政公用工程管理与实务复习习题详细解析二
- 8013木骨架罩面板顶棚施工工艺
- 9自行车坐垫SolidWorks设计
- 10履带吊cad图
- 11GB/T 36565-2018 煤基费托合成 石脑油
- 12GH/T 1065-2010 清弹机
- 13《工业与民用配电设计手册》第三版LS
- 14备战2011年一级建造师的"三招记忆法"
- 15北京四合院建筑CAD施工图纸