手轮注射模设计
- 文件大小:709.3KB
- 浏览次数:
- 发布时间:2014-03-26
文件介绍:
本资料包含pdf文件1个,下载需要1积分
通过对手轮结构、表面质量和尺寸等基本参数的分析,对手轮注射成型模具进行了整体结构设计和部分零件的结构设计。该模具为潜伏式浇口动模推杆进浇的二板模,采用二次推出解决了因产品空间受限无法利用内抽芯或斜顶成型筒形内部骨位的难题。模具结构简单合理,产品质量合格、稳定。 By analyzing the structure, surface quality and basic parameters of the wheel, the overall structure and component structure of the hand wheel injection mold are designed. This mold is two-plate mold with submarine gate and plastic flows into the cavity through the gate on the push pole. The problem that the bone-bit can't be formed by inner pulling or slant because of the limited space is solved. The mold structure is simple and reasonable, product quality is acceptable and stable.
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1数控机床 课件
- 2回止阀32NH63y-250aaacad图纸
- 3【山东造价员考试精讲】第二讲_建筑绘图基础(制图知识,学看建筑图)
- 4《电气安装工程接地装置施工及验收规范》GB50169
- 5SY/T 7370-2017 地下储气库注采管柱选用与设计推荐做法
- 6市政质检32002B 模板、支架和拱架安装检验批质量验收记录(二)(2010版)
- 7工业厂房外观设计
- 8蜗轮减速器总装图
- 9建筑工程项目管理规划书(完美版)
- 10自行车新型变速装置ZXB-41-00
- 11GH/T 1248-2019 信阳红茶
- 12锅炉砌炉工艺规程
- 13工程机械机架底盘step/stp格式
- 14GB/T 19466.4-2016 塑料 差示扫描量热法(DSC) 第4部分:比热容的测定
- 15电力工程电气设备手册-电气二次部分