机床灌胶结合面特性参数试验及预测
- 文件大小:244.23KB
- 浏览次数:
- 发布时间:2014-03-26
本资料包含pdf文件1个,下载需要1积分
采用单因素试验法,分析了胶膜厚度、面积、法向压强对特性参数的影响规律及机理。试验结果表明:灌胶结合面动刚度与阻尼随着法向压强以及胶膜面积的增加而提高,而随着胶膜厚度的增加而降低。基于最小二乘回归法建立了灌胶结合面特性参数与各影响因子的预测模型,以供推算其他条件下的特性参数。试验结果为机床整机动态特性的预测以及灌胶工艺参数的确定提供了基础数据与技术参考。 By single-factor experiment, the impact and mechanics of glued thickness, area, normal pressure for characteristic parameters are analyzed. Result of experiment shows characteristic parameters is ascending when normal pressure and square measure are ascending, and it will descend when thickness ascend. Prediction model between characteristic parameters of glued joint and different factors by the method of least square is established to predicts characteristic parameters under other facts. Results of experiment provides technical reference and basic data for the forecast of dynamic characteristic parameters of machine tool and determination of gluing technic parameters.
- 1公路工程钢波纹涵管整装波纹涵管施工工艺
- 2烟气脱硫流程CAD图
- 3(素)混凝土挡土墙施工方案
- 4经典户型住宅楼设计施工图纸
- 5GB/T 33157-2016 建筑用绝热制品 与面平行拉伸强度的测定
- 6228.挤扩支盘灌注桩在工程中的研究与应用(摘录自《山西建筑》05年11期第52-53页)
- 7平板闸阀美标ZF3F300-6全套CAD图纸
- 8DB14/T 750-2013 梨小食心虫综合防治技术规程
- 9NY/T 3007-2016 瓜实蝇防治技术规程
- 10GB 15763.1-2001 建筑用安全玻璃 防火玻璃
- 11三天学会预算员
- 12离合器技术参数表格CAD图纸
- 13SH/T 1148-2001 工业用乙苯纯度及烃类杂质的测定气相色谱法
- 14PC155卧锤式破碎机(全套)dxd格式
- 15工程造价-知识精华200条