木板热压机整体框架结构应力强度分析及改进措施
- 文件大小:1.44MB
- 浏览次数:
- 发布时间:2014-03-26
本资料包含pdf文件1个,下载需要1积分
本文根据现场实测所得的某型木板热压机框架尺寸,利用Pro/E建立了框架的3D实体模型,运用Hypermesh进行实体网格划分,然后借助ANSYS对框架的保压工作阶段进行了有限元静力学模拟。最初的仿真结果表明该框架结构存在较大的应力集中,无法满足强度设计要求,进而对框架结构进行了局部改进,重新校核验证了改进后的结构设计是合理的,最终的框架结构设计已交付工厂生产。 Based on the board hot-pressing frame' s dimensions measured from factory, this paper built a 3D frame model with Pro/E and meshed the frame into solid elements with Hypermesh. In order to simulate the frame' s keeping pressure, status, static analysis was performed by ANSYS. The first simulation result verified that the original frame design can't meet the strength design requirements. Therefore, it improved the flame design second times and repeated the FEA analysis to check that the updated frame design is reasonable. In the last, the final frame design had been sent to the manufacturer and applied in the production.
- 1结合面参数的超声检测方法研究
- 2DB32/T 2245-2012 核果类果树种质资源收集技术规程
- 3GB/T 2626-92 自吸过滤式防尘口罩通用技术条件
- 4GB/T 18419-2009 家用卫生杀虫用品 杀虫气雾剂
- 5040100电器箱钣金壳体CAD图纸
- 6朝天门家装施工图
- 7凸轮cad图纸
- 8JIS X4171-1996 Information Processing -- SGML Support Facilities -- SGML Document Interchange Format
- 9沉箱出运安装方案
- 10万科:工作文件控制程序
- 11全焊接球阀8-WQ363F600A全套CAD图纸
- 12水和水蒸气流量计算程序
- 13GB/T 1273-2008 化学试剂 三水合六氰铁(II)酸钾(亚铁氰化钾)
- 14扭曲模型SolidWorks设计
- 15某综合楼一层平面图