汽轮机主油泵轴承断裂分析及预防措施
- 文件大小:729.06KB
- 浏览次数:
- 发布时间:2014-08-09
本资料包含pdf文件1个,下载需要1积分
火电厂汽轮机主油泵轴承在运行中发生断裂,通过断口观察、化学成分、显微金相、扫描电镜、力学性能等试验对断裂原因进行分析.结果表明,轴承为非正常的网状铁素体组织,致使螺检冲击功明显降低,以及材料丛体中夹杂物的存在.使得在应力集中部位萌生裂纹源是轴承断裂的主要原因。
The bearing of main oil pump for steam turbine fractured during operation. The fracture causes was analyzed through tile experiments including fracture observation, metallurgical microscopy, scanning electron microscope and mechanical properties. The results show that the state of bearing is an abnormal network ferritc strttcture, which makes the impact energy of the bearing obvious decline, leads to the concentration of stress in certain parts of matrix, and initiates cracks when it is combine with existing inclusions in matrix. This is the main cause of the bearing fracture.
油泵,轴承,断裂,失效分析,预防措施,oil pump,bearing,fiacture,failure analysis,preventive measure。
汽轮机主油泵轴承断裂分析及预防措施。
- 1操纵杆支架零件图
- 2一级建造师建设工程经济:利息与利率的概念
- 32013云南计价规则word版
- 4YB T004-1991初轧坯和钢坯技术条件
- 5连续模具设计,料带排样设计全套
- 6多型腔装配图CAD图纸
- 7水和蒸汽性质计算软件包
- 8QB/T 2564.10-2015 螺钉旋具 Z型十字槽螺钉旋具
- 9建筑工程建筑面积计算规范2008年版
- 10GB/T 29512-2013 手部防护 防护手套的选择、使用和维护指南
- 11GB/T 26507-2011 石油天然气工业 钻井和采油设备 地面油气混输泵
- 12DB64/T 584-2010 肉牛屠宰工艺及胴体生产分割技术规范
- 13寻血猎犬概念车方向盘三维模型SolidWorks设计
- 14SJ/T 1563-2014 实心聚四氟乙烯绝缘同轴射频电缆
- 15山东省农村中小学远程教育卫星避雷系统集成工程施工方案