增压泵用机械密封稳态分析及改进
- 文件大小:791.8KB
- 浏览次数:
- 发布时间:2014-10-16
本资料包含pdf文件1个,下载需要1积分
摘要:针对机械密封在核电厂增压泵的使用情况欠佳问题,对机械密封端面、两平行面间、微间隙流的压力稳态特性进行了分析,并应用柱坐标系Reynolds方程及有限差分法进行求解,得到密封端面压力的分布。根据此分析,说明了增压泵失效的原因,并提出了一些改进措施,从而使机械密封在核电厂增压泵的使用中更为可靠。
With respect to the situation that the booster used in nuclear power plant had poor performance, in this article, the pressure and its stability between end surfaces of mechanical seal were analyzed. Reynolds equation and finite differential method were used to obtain the distribution of the pressure between two end surfaces. Based on the analysis, the cause induced to booster failure was found, and then some improvement measure were proposed, which will be possible to make the booster in more reliable performance.
关键词,机械密封,增压泵,微间隙流,稳态特性,有限差分法压力分布,mechanical seal,booster,micro gap flow,stability characteristic,finite differential method,pressure distribution。
增压泵用机械密封稳态分析及改进。
- 1DB14/T 1854-2019 沙枣扦插育苗技术规程
- 2SJ/T 9562.1-1993 N型射频同轴连接器质量分等标准
- 3土木工程施工(房屋建筑方向)课件-第5讲_砼预制桩施工(一级建造师考试必备)
- 4平流沉淀池(1)
- 5DB34/T 1168-2010 行政审批服务 术语和定义
- 6基于Pro/E的扣板模具设计与制造
- 7高科东路(唐陆公路至华东路)道路维修工程设计施工图纸CAD
- 8采空区强夯处治工程施工方案
- 9GB/T 6072.6-2000 往复式内燃机 性能 第6部分:超速保护
- 10GB/T 38402-2019 皮革和毛皮 化学试验 六价铬含量的测定:色谱法
- 11梁景华-杭州南都东方润园样板房施工图全套
- 1225立方米液氯储罐课程设计
- 13开源的粉末3D打印机的机械设计图Pwdr Model 0.1-1
- 14CCGF 211.10-2008 皂类
- 15车轮