离心管模热挤压缩径力能参数的有限元分析
- 文件大小:1.1MB
- 浏览次数:
- 发布时间:2014-08-28
本资料包含pdf文件1个,下载需要1积分
基于弹塑性热力耦合有限元法,使用Pro/E软件建立了离心管模模型,进行网格划分后导入MARC,应用MARC软件对挤压稳定性和热挤压过程进行了有限元模拟分析。通过总结离心管模热挤压三维变形规律,分析了其在热挤压过程中应力和力能参数的变化,为设计热挤压缩径专用设备提供依据。该方法对同类产品热挤压过程的研究也有借鉴价值。
Based on elastic-plastic and thermal-stress coupling finite element method (FEM), the centrifuge pipe mould was molded by Pro/E, and was imported into the MARC after meshing. Finite element analysis is performed to extrusion stability and the process of hot extrusion by MARC. By summarizing the 3D deformation regulation of the hot extrusion centrifuge pipe mould, the changing of the stress and mechanical property parameters during the process of hot extrusion is analyzed for the design of equipment in radial hot extrusion. This method could be a reference for thermal extrusion processing of the similar products.
热挤压,有限元,热力耦合,数值模拟,hot extrusion,finite element method,thermal-stress coupling。
离心管模热挤压缩径力能参数的有限元分析。
- 1DB34/T 5037-2015 船闸工程施工安全检查标准
- 2DB1308/T 064-2002 无公害菜豆生产技术规程
- 3供电设计资质备案书
- 4标准施工招标资格预审文件和招标文件2007
- 5重型便桥施工检算(midas验算比较详细)
- 6设计院设计文件(全套结构标准图集CAD版)
- 7竣工文件的编制要求和注意的问题
- 8DB11/T 1678-2019 城市轨道交通广告设施设置规范
- 9委托检验试验外包管理规定
- 10JB ZQ 4167-1997 中心孔简化表示法标准
- 11复合破底座
- 12广西金镶玉小区十一层高层住宅给排水图纸
- 13DB1304/T 118-2002 出口花生无公害高产栽培技术规程
- 14D29两种斜推杆内侧抽芯典型结构的比较
- 15汽车总体设计