提高形状测量精度的直接与间接反射分离方法
- 文件大小:1.41MB
- 浏览次数:
- 发布时间:2014-11-23
针对光学三维形状测量中间接反射的存在导致三维测量精度下降的问题,提出一种分离直接反射和间接反射的改进结构光投影方法。该方法反向利用直接反射和相互反射间的相位差异,以格雷码结构光为基础设计出相互相位差为900的调制结构光,将它投射到被测物体,以此分离出直接反射和间接反射;并加上改进结构光的正.反投影,采检测结构光条纹图像中的结构光边缘亚像素定位。实验结果表明,该方法不仅有效地分离出了间接反射,而且提高了被测物体的三维测量精度,扩大了三维测量范围。
In three-dimensional shape measurement, the existence of the indirect reflection declines the three-dimensional mea- surement precision. In order to separate the indirect reflection, an improved structured light projection method is proposed. This method uses the phase difference between the direct and indirect reflection and to design phase difference for 90~ structure light modulation based on the gray codes. Using positive and negative structure light projection, it detects the structure light edge and edge sub-pixel localization. The experimental results show this method not only effectively improves the separation of indirect reflection and three-dimensional measurement accuracy of the measured object, but also expands the range of three-dimensional measurement.
三维形状测量,直接-间接反射分离,正-反投影,three-dimensional shape measurement,direct-indirect reflection separation,passive-negative projection。
提高形状测量精度的直接与间接反射分离方法。
- 1偏角法测设圆曲线
- 2“CA6140车床拨叉” 零件的机械加工工艺及工艺设备
- 32012年二级建造师执业资格考试讲义建设工程法规及相关知识考前辅导讲义
- 4中国水利规划计划简报(水利建设投资统计)2018
- 5住宅小区CAD平面规划图纸
- 6炼钢R7米连铸机液压系统操作规程
- 7形状和位置公差标注示例图册
- 8GB/T 29168.1-2012 石油天然气工业 管道输送系统用感应加热弯管、管件和法兰 第1部分:感应加热弯管
- 9有限元网格划分的基本原则
- 10凤山路改建工程施工组织设计
- 11标书制作
- 12全套设计-简易吊车设计,毕业论文
- 13房地产项目管理(工程管理)的重点
- 14铝合金安装工程检验批质量记录表
- 15美景别墅数码多联空调设计施工图纸